|
| NC 5ltr |
|
|||
|
Gday all
been noticing my brakes have been getting a nasty clunyk sound when i apply them going around corners and slowing down to a stop. They seem to be getting worse as well causing the car to tramline under normal braking. only thing i can think of that its the sliding calipers jamming when releasing from the rotors,but thats an un-educated guess as i dont know much about brake setups. oh yeah its a 94' fairlane cheers in advance NC
_________________ "Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."
|
|||
| Top | |
|||
| MARK.TANIA |
|
||
|
it sounds like the pads are about stuffed mine did the same thing about 4 years ago.also i would also check the brake slides might need cleaning and regreaseing just try it it might be it.
|
||
| Top | |
||
| fordgt290 |
|
||
|
sure its not bushes that are warn making noise, like compression strut bushes or ball joint even. brakes dont usually make a clunk noise unless some thing is really loose or failed
|
||
| Top | |
||
| NC 5ltr |
|
|||
|
could be the pads,i cant recall the last time i changed them.
Its more of a popping sound come to think of it,it does it reversing,around corners and braking slowly(gentle pressure).
_________________ "Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."
|
|||
| Top | |
|||
| XHII V8S |
|
||
|
Clunk? Like a crack sort of noise? I had a clunk coming from both wheels about 6 weeks ago it was really bad when I turned and braked. Turns out it was the upper control arm bushes, they were non existent. This caused the top of the wheel to have in & out movement causing the noise.
_________________ Pacies & single 2.5'. New manifold to come soon... |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 21 guests |
