Fordmods Logo

removing axel from diff 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: removing axel from diff
Posted: Sun May 06, 2007 10:50 pm 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 5361

Joined: 31st Oct 2005

Gallery: 28 images

Ride: NC II Fairlane

Location: morayfield
NSW, Australia

hey all, as stated in my other thread im pulling the diff apart to get the gears out, but one of the axels is stuck, i got one side out with no problems but i have tried to get the other side out with no luck, i have tried jimmy bars (aka crowbar) mallets and all sorts but it just wont budge...

anyone got a trick or two in getting them out? or is it possible to wedge the gears out with one side still stuck inside

 

_________________

Prendre soin de sa sante www.viagrasansordonnancefr.com vente libre en France

Top
 Profile  
 
 
Posted: Sun May 06, 2007 10:55 pm 
Technical Contributor
Offline
User avatar

Age: 44

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

rotor backwards and a few loose bolts.
slide hammer it with the disc.

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
Posted: Sun May 06, 2007 10:56 pm 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 1669

Joined: 23rd Dec 2004

Gallery: 1 images

Ride: Boosted ED XR6, EBII Mont Wgn

Power: 252 rwkw

Location: Mildura
VIC, Australia

get a stock rim put it on the axil backwards thred on two nuts about half way on and then use the rim like a slide hammer.. works every time for me..

 

_________________

Image
[SEXYR-6] ED XR6 T5 Turbo Build
[EBW-347] EB Wagon V8 Stroker Build
FordMods Member #1761

Top
 Profile  
 
 
Posted: Sun May 06, 2007 11:10 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3928

Joined: 5th Nov 2004

Gallery: 9 images

Ride: ED 5 Speed GLiXR

Location: Now in Brisbane
QLD, Australia

sexyr6 wrote:
get a stock rim put it on the axil backwards thred on two nuts about half way on and then use the rim like a slide hammer.. works every time for me..


Yep that is the easiest way and most recommended way to go about it, so easy we did that in a car park with minimal tools on a mates torana.

 

_________________

17" Tezza Steelies, King F**king lows, pedders sports ryders, 2.5" cat back exhaust, pacemaker extractors, T5 manual
Low, loud and Slow

Top
 Profile  
 
 
Posted: Sun May 06, 2007 11:14 pm 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 5361

Joined: 31st Oct 2005

Gallery: 28 images

Ride: NC II Fairlane

Location: morayfield
NSW, Australia

cheers, ill give that a try. issue is its not on a car so ill have to drop it off the sawhorses and rest it on the ground to do it... i tried for over an hour

 

_________________

Prendre soin de sa sante www.viagrasansordonnancefr.com vente libre en France

Top
 Profile  
 
 
Posted: Sun May 06, 2007 11:27 pm 
Getting Side Ways
Offline

Age: 44

Posts: 1329

Joined: 5th Nov 2004

Ride: 66 Coupe

Location: Perth
WA, Australia

also inspect the axle splines when you do get it out, if they are not dead straight, swap that axle for another, its probably got a bit of a twist in it.
Top
 Profile  
 
 
Posted: Sun May 06, 2007 11:29 pm 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 5361

Joined: 31st Oct 2005

Gallery: 28 images

Ride: NC II Fairlane

Location: morayfield
NSW, Australia

i wont be using these axles, ill be using the ones already in the LSD. as they look good condition. i just dont want to install the LSD with 2.77 gears

 

_________________

Prendre soin de sa sante www.viagrasansordonnancefr.com vente libre en France

Top
 Profile  
 
 
Posted: Tue May 08, 2007 1:58 pm 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 5361

Joined: 31st Oct 2005

Gallery: 28 images

Ride: NC II Fairlane

Location: morayfield
NSW, Australia

well i got it... i tried how everyone said.. didnt work :@

so i got angry, stood it on the wheel and lifted the diff up and still nothing...

in the end i lay'd it on the ground and done a running karate kick to it (while holding on to the swing set so i didnt end up on my head) and it got it off... it just needed 80kg of persuasion hahaha. nothing like some karate to start off your day...

now nest question. how do i undo the shaft from the drive shaft to the back of the diff... i see there is a bolt but there is now nothing to stop it from spinning... maybe a long screwdriver through the hole... i dunno

 

_________________

Prendre soin de sa sante www.viagrasansordonnancefr.com vente libre en France

Top
 Profile  
 
 
Posted: Wed May 09, 2007 2:40 am 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 5361

Joined: 31st Oct 2005

Gallery: 28 images

Ride: NC II Fairlane

Location: morayfield
NSW, Australia

im stuck with this at the moment..

Image
Image

how do i get that undone when there it nothing for it to grab onto... i thorght about a rope around the car somewhere and then attach it through the flange and try and undo the bolt that way... im out of ideas and need this out before friday.

 

_________________

Prendre soin de sa sante www.viagrasansordonnancefr.com vente libre en France

Top
 Profile  
 
 
Posted: Wed May 09, 2007 7:46 am 
Technical Contributor
Offline
User avatar

Age: 44

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

1: rattle gun
2: steel box section, drill 2 holes and bolt it up to the flange.


mmm flange

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
Posted: Wed May 09, 2007 8:19 am 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 5361

Joined: 31st Oct 2005

Gallery: 28 images

Ride: NC II Fairlane

Location: morayfield
NSW, Australia

cheers ill give it a try... i wish i knew about that bolt before i removed the wheels... would of made my life 1 hell of alot easier...

 

_________________

Prendre soin de sa sante www.viagrasansordonnancefr.com vente libre en France

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 4:11 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names