Fordmods Logo

rotor compatibility 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: rotor compatibility
Posted: Mon Nov 02, 2009 10:07 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1997

Joined: 31st Dec 2007

Gallery: 9 images

Ride: xc wag's, tnklane wag's

Location: Munruben
QLD, Australia

G'day I recently picked up a set of abs equipped eb or ed futura rotors off a wreck. The rotors looks basically new, so I figured I'd take a punt, but now I'm curious will they fit, or are they a no go, as I've got an ef, I checked out supercheap and they have different part numbers ea/eb/ed to ef/el, but I'm curious what the difference is if any.
Basically does anyone know for sure whether they're interchangeable.

They're going on an ef fairmont with abs.

secondly I've changed to an el diff, I haven't had any dramas with not changing the suspension arms, But I haven't had a working handbrake since.
Lokking through the threads I've found they'res difference, I'm just curious as to what of the handbrake sstem I need, as I'm a littlconfused, eg does rear cable relate to the cable strtching the diff or the one along the length of the car?

 

_________________

Signature removed by moderator.signature must not exceed 120x500 pixles

Top
 Profile  
 
 
 Post subject: Re: rotor compatibility
Posted: Tue Nov 03, 2009 8:54 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1997

Joined: 31st Dec 2007

Gallery: 9 images

Ride: xc wag's, tnklane wag's

Location: Munruben
QLD, Australia

anybody?

 

_________________

Signature removed by moderator.signature must not exceed 120x500 pixles

Top
 Profile  
 
 
 Post subject: Re: rotor compatibility
Posted: Tue Nov 03, 2009 9:20 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

afaik they will fit..
benj has el rotors on the front of his eb...
i think the difference is the stud length
Top
 Profile  
 
 
 Post subject: Re: rotor compatibility
Posted: Tue Nov 03, 2009 9:24 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1228

Joined: 5th Mar 2006

Gallery: 25 images

Ride: FALCON EB TURBO, EL XR6

Location: Sydney
NSW, Australia

I have ED abs rotors on the front of my EL XR6.

 

_________________

FALCAHOLIC

IF AT FIRST YOU DON'T SUCCEED
DESTROY ALL EVIDENCE THAT YOU EVEN TRIED


Image

Top
 Profile  
 
 
 Post subject: Re: rotor compatibility
Posted: Tue Nov 03, 2009 10:33 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1997

Joined: 31st Dec 2007

Gallery: 9 images

Ride: xc wag's, tnklane wag's

Location: Munruben
QLD, Australia

Ah hell your right, just went and checked the studs are heaps shorter, hmm not neccasarilly a big deal though.

Yeah just worried, if I'd fitted them, and say either they plain didn't fit, or say the abs wheel was different etc.

Much appreciate it, thanks
Joel H.

 

_________________

Signature removed by moderator.signature must not exceed 120x500 pixles

Top
 Profile  
 
 
 Post subject: Re: rotor compatibility
Posted: Wed Nov 04, 2009 12:23 am 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1228

Joined: 5th Mar 2006

Gallery: 25 images

Ride: FALCON EB TURBO, EL XR6

Location: Sydney
NSW, Australia

OZBMX wrote:
Ah hell your right, just went and checked the studs are heaps shorter, hmm not neccasarilly a big deal though.

Yeah just worried, if I'd fitted them, and say either they plain didn't fit, or say the abs wheel was different etc.

Much appreciate it, thanks
Joel H.


Didn't effect my car. I have had the FTR's on my EB for 8 years no probs (with the shorter studs), and my EL has them from starndard (FTR option) and has had the ED disc's on the front for atleast a year. I don't think the shorter studs will worry you.

If you are worried about the ABS, just count the holes in the tone wheels and make sure they have the same number of holes in them.

Bearings and shells are the same so they will slide straight on. Just check your bearing condition as you go.

Wait! are these rotors for the front or rear???? I didn't ask. If your talking front then no worries, if you are talking rear... its a no go.

 

_________________

FALCAHOLIC

IF AT FIRST YOU DON'T SUCCEED
DESTROY ALL EVIDENCE THAT YOU EVEN TRIED


Image

Top
 Profile  
 
 
 Post subject: Re: rotor compatibility
Posted: Wed Nov 04, 2009 9:14 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1997

Joined: 31st Dec 2007

Gallery: 9 images

Ride: xc wag's, tnklane wag's

Location: Munruben
QLD, Australia

Yeah front I thought I'd mentioned it, doh.
but yeah as I said I'd checked the studs,
Yeah when I said not necessarily a problem, be cause I'm on stockies anyway, hehe.

and beairngs etc. I think were done to match, they were shining brightly on the ground probably why I noticed them, As I was planning to pickup a set of new fronts anyway.
Yea I'll check the tone wheels but if you haven't had dramas. shouldn't be an issue.

 

_________________

Signature removed by moderator.signature must not exceed 120x500 pixles

Top
 Profile  
 
 
 Post subject: Re: rotor compatibility
Posted: Thu Nov 05, 2009 5:10 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

If the ABS ring is not the same, they do knock out, and can be tapped in easily, so you could swap them.

BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
 Post subject: Re: rotor compatibility
Posted: Tue Nov 10, 2009 7:15 am 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1997

Joined: 31st Dec 2007

Gallery: 9 images

Ride: xc wag's, tnklane wag's

Location: Munruben
QLD, Australia

Yeah they seemed the same. but somethings notright, as now i have the abs light pn, so guess got to pull it back apart now.

 

_________________

Signature removed by moderator.signature must not exceed 120x500 pixles

Top
 Profile  
 
 
 Post subject: Re: rotor compatibility
Posted: Tue Nov 10, 2009 9:38 pm 
Technical Contributor
Offline
User avatar

Age: 59

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

What codes do the ABS diagnostic come up with ??

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
 Post subject: Re: rotor compatibility
Posted: Tue Nov 10, 2009 9:43 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1228

Joined: 5th Mar 2006

Gallery: 25 images

Ride: FALCON EB TURBO, EL XR6

Location: Sydney
NSW, Australia

OZBMX wrote:
Yeah they seemed the same. but somethings notright, as now i have the abs light pn, so guess got to pull it back apart now.


Really? mine never came on. Did you break/move/damage a abs sensor?

 

_________________

FALCAHOLIC

IF AT FIRST YOU DON'T SUCCEED
DESTROY ALL EVIDENCE THAT YOU EVEN TRIED


Image

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Apr 20, 2024 4:55 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names