Joined: 5th Nov 2004
Hi i got this info from somone on another website but only in words,
ive got a ED classic, bought a 6 pin (3 way) switch with
rice missile launcher on it..
gonna set it up as follows for stage two switchable...
(toggle switch pins shown as these)
an 18ohm 10W , 22ohm 10 watt, 2x 1 ohm 10W and a 0.22 ohm 10W.
(PIN 57) 12 volt pin spliced to to 18 ohm to HARD ()- and
also 22 ohm to MEDIUM ()-
(PIN 3icon_cool.gif ECU s5 pin to all 3 ()-
the 1 ohm and 0.22 ohm in series after HARD -() then to s5
the 1 ohm after MEDIUM -() then to s5
and the OFF -() bypasses the whole lot to s5
dya reckon that will work. (cost me 12 bucks..including diodes for brakelight mod)
it kinda confused me so i drew a diagram is this right and will it work on a EBII?
P.S and yes i know about these things f**k up the boxes but i am changing the box soon so it doesn't matter.
Joined: 10th Nov 2005
Ride: 2003 BA XT
why not use a potometer carnt speel either, and have it adjustable?
|Who is online|
Users browsing this forum: No registered users and 12 guests