|
| james kay |
|
||
|
ide like to know more bout gettin a tailshaft that will hold together at high speeds, at da moment i can do from tsvl to cloncurry in 5.5 hour and bout 3.5 of that is cruisen at 180km/h, my limiter.
wen my new engine is paid for and installed i will have no limiter, any help would be grateful.
_________________ Going fast is the going thing no matter what you drive, Ford, Holden or jap s**t, lol. |
||
| Top | |
||
| data_mine |
|
|||
|
Get a two-piece shaft made up and install the T5 manual. The auto's aren't made for high speeds.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
I have mine past 240 regularly at eastern creek, alloy xr tail shaft, no whip, should probably get a tailshaft loop installed. chris you only have about 4km'h more carry at turn 1 oran park than me.. but then you are driving a fat a** GT-P, I take it you are talking about the GP and not the short course.
_________________
|
|||
| Top | |
|||
| spaz ef |
|
||
|
i had my ef on the 180 speed cut out for about 4hrs straight when i lived in darwin on my way back to perth ... no drive line problems just a glowing exausht and bloody hot tyers... would'nt do it again but with standed tail shaft
|
||
| Top | |
||
| data_mine |
|
|||
|
dc_todd wrote: I have mine past 240 regularly at eastern creek, alloy xr tail shaft, no whip, should probably get a tailshaft loop installed. chris you only have about 4km'h more carry at turn 1 oran park than me.. but then you are driving a fat a** GT-P, I take it you are talking about the GP and not the short course.
Yeah the full course. Getting the GT-P up turn 11 is a slow task, and ruins the main straight. Still good for 1:25 laps (as fast as the V8SC's in the wet).
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
looks like you carry those extra few kay on me everywhere.. I am running 1.29.3's pretty much.. but thats all about to change..
New car to enter the garage soon, Well father inlaws, but I have access to the starter button as needed.. will even try to bring it to Dyno day to see what she has got. 
That is a v12 full race spec Mike Roddy build XJS jag.. road registered to on club plates 
_________________
|
|||
| Top | |
|||
| Grimketel |
|
|||
|
Wave_Man wrote: Only JUST came across this Thread...
I had heard off this happening... Wonder how close i was when i did 200+ in a 97 MAGNA!!! magnas dont have a tailshaft as far as I know being front wheel drive....
_________________ enough isn't enough |
|||
| Top | |
|||
| JWIllo |
|
||
|
More Grunt wrote: Wave_Man wrote: Only JUST came across this Thread... I had heard off this happening... Wonder how close i was when i did 200+ in a 97 MAGNA!!! magnas dont have a tailshaft as far as I know being front wheel drive.... Yeh the east/west front wheel drive setup on magnas mean they dont have tailshafts. Ive done the same 200+ in my old's 97 magna, after i brought her back down and was taking off from some lights, the drive to the wheels failed in a big crack and had to get my mate too tow me home. smelt like fkin a** too  .
All the above was when i was a f**k idiot back then, and no, havent gone over about 130km/h since  Even with an XR with alloy tailshaft.
|
||
| Top | |
||
| ea_falcon |
|
||
|
ive been 180 in my falcon but the speed cut did not kick in minde u i let go of the accelerator wen i hit that fast lol felft liek it could of gone well over 230
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| millsy81 |
|
||
|
ea_falcon wrote: ive been 180 in my falcon but the speed cut did not kick in minde u i let go of the accelerator wen i hit that fast lol felft liek it could of gone well over 230
You car is not speed limited. Rev limited yes.
_________________ Bog Stock Au fairmont Ghia |
||
| Top | |
||
| Burns |
|
|||
Age: 34 Posts: 540 Joined: 9th Aug 2007 Ride: FG Ute, ED XR8 Sprint, GPZ900R Location: Leopold, Geelong |
I know i wouldn't be thinking about taking my rev or speed limiter off anytime soon. 183km/h is fast enough for me
_________________ The Past: EF Fairmont, EL Fairmont 5.0, HR Special, NF Fairlane 5.0, GSX 250-F, BA II XR8, VS3 Ute, VS2 L67 Calais |
|||
| Top | |
|||
| james88 |
|
|||
|
are they ef tail shafts the same accross the series because my mates gli starts shaking like crazy at about 160kmph but my xr6 is smooth and hits the speed limiter at 180kmph smoothly. why is this both are in good condition and both are manual????????
_________________ there are a few falcons in my drive way, some of them are turbo charged and some arent, some have big engines and some are small but they all have one thing in common and that is the blue oval on the front |
|||
| Top | |
|||
| smoke_ |
|
|||
|
simple things like a flat spot generate a resonance at higher speeds. my ef has f**k front tyres from a camber problem, and theyre hell noisy and vibrate the steering wheel at 100km/h but at 160 (race conditions) its smooth as.
mine's also a gli manual.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| Hybrid34 |
|
||
|
how would this tailshaft snapping go with cars that are 4wd, say a Subaru WRX, or a rwd commo,?? or a front wheel drive...its it more comoon in a certain speicies of cars?
one more thing, what about lwb cars? more commoon to go? thanks - Ash
_________________ Sucessful trades with Schmee, Braidy, Niko, The_Ghost, YBHVE4, Stalker
|
||
| Top | |
||
| 4dlvr |
|
||
|
ive herd of heaps of wrx snapping their tailshafts, mostly on take offs.
the alloy tail shaft ford uses does the job but can fail eaisly if abused. so no going past 180km/h
_________________ 96 EF FAIRMONT |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
