|
| falcon_3512003 |
|
|||
|
dose anyone know was wires i have to splice into to hook up the device just got one
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| prydey |
|
|||
|
speedo (white wire on mine - eb) ignition power and earth. I'll be using the power and ground from the clock/trip computer as i'll be putting the device in behind there.
i'm doing this install as we speak but actually need a bit of advice myself. the device needs to be set on +5v. to do this it needs to be on lk2. if you have a jaycar unit, how is yours set up. my brother did mine as thats not really my area. i have 2 jumpers accross a couple of pins but don't know if they're right. any idea what i'm on about?
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
sort of but i havent got that far yet i duno if my wires are going to be the same as i have a 16 ef so if anyone knows what wires i have to use let me know cause im doin this today myself
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| prydey |
|
|||
|
6 and v8 cluster wires are the same. speedo wire is the white one. mine is in and working but yet to determine correct speed until i can borrow my brothers gps.
ended up with links on lk2 and lk3. used power and earth from trip computer or clock whichever you have. sorry, just realised you have a ef. in the tech doco's on this site look up trip computer install for ef. in that doco it should tell you somewhere which wire is the speedo wire. should also give you pics and a suitable power and earth. hope this helps.
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... Last edited by prydey on Sat Mar 31, 2007 2:38 pm, edited 1 time in total. |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
ok what do i use just got a pin diagram for the ef
pin 4 speed signal input pulsed /white pin 5 speed signal out data/ white pin9 speed sender supply +12v red ok what one do i use ?
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
k now i got s**t blody car is in limp mode who knows what goes on with these things it wont even get the speedo to work when you set it to 0 n stuff ?????
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
how do i get the car out of limp
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
can anyone tell me if pin 4 on the plug is the rite one cause im getting nothing out of the speedo at all but the led flashes ??
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
headach time grrrr
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| prydey |
|
|||
|
you should have instructions with the corrector. these tell you exactly what to do. if you have a flashing led but no speedo try putting the link onto lk3. if its already on lk3 then try lk4. i'm no electrics guru by any means but though the instructions are probably not the clearest i could follow them and its all working sweet.
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
| Top | |
|||
| gogetta |
|
|||
|
what device is it?
_________________ |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
Contact shiftkits.com, they made built and supplied instructions for mine when i did the 3.9 conversion
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
yer i have them but been throu it all and tried diffrent comboes and nuthing and it put the car in limp mode to
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| Steady ED |
|
|||
|
If the car is going into limp mode, you've obviously cut the speedo signal between the sender and ECU.
So either you've made a mistake with the wiring, or the speedo corrector is faulty.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
well i cut the m 4th wire
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 23 guests |
