|
| Sam_Rizvi |
|
|||
|
Thanx LedBoy,cheers.
_________________ 2006 BF Falcon XR6 N/A - <current> |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
falcon1999 wrote: cjh wrote: There is a specific way to service an auto tranny in an EFII to BA ( 4sp auto ). If not followed, there will be too little oil in the tranny, and you'll stuff it. Max Ellery's manual seems quite straight forward. It looks like you just have to remove the oil pan retaining bolts then tap the pan at one corner to break it loose, which then allows the fluid to drain. Am I missing something here? cheers yes. you're missing the fill procedure. If not done right the box will be under filled. = not good. |
||
| Top | |
||
| au man |
|
|||
|
Simular question how do i top up the fluid?
|
|||
| Top | |
|||
| cjh |
|
|||
|
Have the vehicle raised and level. Have the transmission cold to cool. Start engine, run through the gears, switch off, top up till fluid comes out the hole, put the bung in, its full. It is as simple as that. DO NOT do it when it's hot, the level will be too low when cold.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| matman72 |
|
||
|
I didnt want to start a new thread over this, so i hope this gets noticed.
Just bought an EF recently(without dipstick), once iit warms up, the revs increase before it engages, as if im riding the clutch in a manual. but only whaen its warm. Anyway, I know where the plug is, ive read to use a 5/8 or a 16mm, cant recall the precise sizes now, will double check that, but, how the hell do i pour fluid in there. Make up a bottle with a hose so i can squeze it in perhaps? Or is there something available to make it easier for me. I know SOMEone has had to do it before, what did you use?? Many thanx Matt |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 33 guests |
