|
| Mr Man |
|
|||
|
hey everyone, first topic for me, hope its in the right section
just a couple of quick questions, i want to fit a towbar to my EF auto i6 sedan, and was just wondering if a trans cooler is necessary?? and do anyone make towbars that u can take the bar bit out and cover it with the plastic insert that is removed from the rear bar when the tow bar is fitted?? thanks
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD |
|||
| Top | |
|||
| voxace |
|
|||
|
I think trans coolers are a good idea even if you aren't towing!
So I'd say definately get one! |
|||
| Top | |
|||
| twr7cx |
|
|||
|
There pretty necessary if your actually going to use that tow bar! If they wern't Ford probably wouldn't of fitted them with the Factory Tow pack as we all know Ford like to cut down costs to sell it for cheaper.
|
|||
| Top | |
|||
| madmax |
|
|||
|
I agree, Trans coolers should be a standard item on all Autos, with or without Tow bars.
If your going to fit a Towbar then a cooler is a must if you don't want transmission problems. Quote: and do anyone make towbars that u can take the bar bit out and cover it with the plastic insert that is removed from the rear bar when the tow bar is fitted??
Never seen or heard of one.
_________________
|
|||
| Top | |
|||
| msman |
|
||
|
u can get a towbar that is removable and sits flush with the bumper but u can't put the cover back on though
_________________ why do u write in here. |
||
| Top | |
||
| Mr Man |
|
|||
|
thanks everyone, i want to use the towbar to tow a trailor with my motorbike in it as i dont have a ute.... anyone know what transcoolers are good and what i should expect to pay for one fitted and/or unfitted??
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD |
|||
| Top | |
|||
| madmax |
|
|||
|
Mr Man wrote: thanks everyone, i want to use the towbar to tow a trailor with my motorbike in it as i dont have a ute.... anyone know what transcoolers are good and what i should expect to pay for one fitted and/or unfitted??
I fitted one to my EA many years ago, I think it was around $150-$180 can't remember for sure. I bought it from Bursons (then Bevics) sorry I don't remember the brand, maybe Davis Craig.
_________________
|
|||
| Top | |
|||
| Mr Man |
|
|||
|
madmax wrote: Mr Man wrote: thanks everyone, i want to use the towbar to tow a trailor with my motorbike in it as i dont have a ute.... anyone know what transcoolers are good and what i should expect to pay for one fitted and/or unfitted?? I fitted one to my EA many years ago, I think it was around $150-$180 can't remember for sure. I bought it from Bursons (then Bevics) sorry I don't remember the brand, maybe Davis Craig. thanks 
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD |
|||
| Top | |
|||
| AU-MUSTD |
|
|||
|
Bursons has them for 110 dollars for a large one and they are piss easy to fitt. Highly recomend them as l nearly fried my auto towing a trailer to ballarat up hills. Overheated and p****d fluid everywhere. Since fitting cooler havent had a problem since. My tow bar is a haymen reece and yes you can remove the tounge and fill the hole with a plastic cap, just check with whoever is fitting it as they may fit just the standard non removable bar.
_________________ Now with a hint of "BLING" |
|||
| Top | |
|||
| Mr Man |
|
|||
|
AU-MUSTD wrote: Bursons has them for 110 dollars for a large one and they are piss easy to fitt. Highly recomend them as l nearly fried my auto towing a trailer to ballarat up hills. Overheated and p****d fluid everywhere. Since fitting cooler havent had a problem since. My tow bar is a haymen reece and yes you can remove the tounge and fill the hole with a plastic cap, just check with whoever is fitting it as they may fit just the standard non removable bar.
how much u pay for the hayman reece one if u dont mind me asking, i got a quote from Autobarn for $600 unfitted for a hayman reece towbar....
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD |
|||
| Top | |
|||
| Dellboy999 |
|
|||
|
Does anyone know can you buy just the plastic insert for when the towbar is removed and the cost, I have a haymen reece on my EA, but no insert and the tounge is out 99% of the time.
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| Mr Man |
|
|||
|
Dellboy999 wrote: Does anyone know can you buy just the plastic insert for when the towbar is removed and the cost, I have a haymen reece on my EA, but no insert and the tounge is out 99% of the time.
do u want the one that comes with the towbar or the one that is part of the bumper??
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD |
|||
| Top | |
|||
| madmax |
|
|||
|
AU-MUSTD wrote: Bursons has them for 110 dollars for a large one and they are piss easy to fitt. Highly recomend them as l nearly fried my auto towing a trailer to ballarat up hills. Overheated and p****d fluid everywhere. Since fitting cooler havent had a problem since. My tow bar is a haymen reece and yes you can remove the tounge and fill the hole with a plastic cap, just check with whoever is fitting it as they may fit just the standard non removable bar.
Are you refering to the hole in the towbar that the tongue goes into or the hole in the bumper? I think he's looking to be able to hide the towbar completely.
_________________
|
|||
| Top | |
|||
| Mr Man |
|
|||
|
madmax wrote: AU-MUSTD wrote: Bursons has them for 110 dollars for a large one and they are piss easy to fitt. Highly recomend them as l nearly fried my auto towing a trailer to ballarat up hills. Overheated and p****d fluid everywhere. Since fitting cooler havent had a problem since. My tow bar is a haymen reece and yes you can remove the tounge and fill the hole with a plastic cap, just check with whoever is fitting it as they may fit just the standard non removable bar. Are you refering to the hole in the towbar that the tongue goes into or the hole in the bumper? I think he's looking to be able to hide the towbar completely. yeah i would love to be able to hide the towbar completely, but i havnt been able to find one with the removable tounge so the plastic insert of the rear bumper can cover the towbar when the tounge is out
a mate of mine reckons u can get them, but no one else has been able to shed any light on the situation, i have been to Autobarn, Repco, Ford and Bursons and still no luck.... i think i will just settle for one with a removable tounge even if there is no cover for it... i will only be towing when i have to put the motorbike on the trailor to take it somewhere.... prob <1% of the time i spend driving....
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD |
|||
| Top | |
|||
| dyl |
|
|||
|
I just got a price for a transcooler it was $270 for an ef fitted. hope this helps.
_________________ 1996 EF Fairmont Ghia
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 15 guests |
*
