|
| revcore |
|
|||
|
My transmission in the ED occassionally thumps into gear but only when it's really hot....When it's cold it shifts nice and smoothly. There is no slipping or grinding at all.
I called the local trnsmission place today and was quoted $165 (New filter, gasket and oil and adjustment of bands if required and a road test)....Is that a good price?
_________________
|
|||
| Top | |
|||
| jonathon |
|
|||
|
thats not a bad price i got mine done at ford here and they had a special in at that time and still payed $195.oo
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| GeZza200 |
|
||
|
Yeah thats not a bad price, i get mine done for $125 where i go but i know the bloke. $165 sounds about right to me.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| 93EB |
|
|||
Age: 46 Posts: 2484 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Probably wont fix it. More likely the S5 solenoid.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| revcore |
|
|||
|
93EB wrote: Probably wont fix it. More likely the S5 solenoid. Is that easy to replace?
_________________
|
|||
| Top | |
|||
| GeZza200 |
|
||
|
Yep, if you replace it get the AU S5 solenoid. I got that done with one of my services it was around 300ish including the service. It would also be good to get a good full flush with your oil, it not cheap but its worth it. My trans has done 240,000 now and its runs awesome still.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| 93EB |
|
|||
Age: 46 Posts: 2484 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Well to do it the pan and oil have to come out anyway. Then you need to remove the valve body to replace it. Its not terribly difficult but it is very fiddly if you only have a car jack to get under it properly. You may as well change it whilst they service it because if you dont and it is stuffed then you will be paying for another tranny service and the part.
Ask your tranny place about the S5 solenoid and see what they say. The only thing is they are expensive little buggers.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| fiftyone |
|
|||
|
i'd be prepared to pay $200 for that sort of work. I'd say $165 is not bad at all, and you'll notice it driving a fair bit better too
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 46 Posts: 2484 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
fiftyone wrote: i'd be prepared to pay $200 for that sort of work. I'd say $165 is not bad at all, and you'll notice it driving a fair bit better too You wont get an S5 and tranny service for $200.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
I get my service done for $120.00 so $165.00 is alright
Dont know much about the soliniods thou
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| low_ryda |
|
|||
|
i got quote $350 at one place for my bf and $220 at another and thought 220 was awsome ! i stand corrected. stupid talentless town.
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
The S5 solenoid is easy to replace depending on what style one is fitted now, there are 2 different types, some have an ALL metal S5 and some with the S5 having a plastic end cap, these are shorter than the steel one and can be removed without having to take the Valve body out, I did.
You CAN use the S5 from an AU $289.50 retail part number AU 640078A1 but you will have to modify the retainer for it. The retainer is a right angle type u shape and at the end of the retainer on the 2 legs they need to be straightened out so that more pressure can be exerted on the S5 and hold it in place properly. If you intend to keep this vehicle I would suggest that the S1,S2,S3 solenoid be changed at the same time. They are $74.50 each part number EF 640078A1. Just make sure when you pull the old solenoids out, that you put the NEW ones in at the same angle as you take the OLD ones out, that way you will not stretch the wires also, be careful how you take the wires off the solenoids. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 58 guests |
