|
| brentxr |
|
||
|
Can some one tell me if u dont use the bf abs for the speed sender on the 6 speed auto how can u get the computer to read the cars speed with out useing the ABS
_________________ brent |
||
| Top | |
||
| Benny D |
|
|||
|
brentxr wrote: Can some one tell me if u dont use the bf abs for the speed sender on the 6 speed auto how can u get the computer to read the cars speed with out useing the ABS one of the worst worded quewtions ever..  anyway im guessing you wanto use the ZF box with some other sort of speed sensor so you dont have to use the ABS speed sensor? id say you cant. but im not overly expirienced. somone may correct me
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| 67RCE |
|
||
|
Magnetic pulse off the tailshaft is the only other solution.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| gusbus |
|
||
|
or if its au2/3 you could put the bf hubs on the yu would have the correct abs things... also cant you get the speed from the au abs module?.. cause if ur putting a bf ecu thats for a 6 speed you will need the abs for it to run i believe.. just re wire the abs plug to the bf's abs plug..
|
||
| Top | |
||
| Papa Smurf |
|
||
|
AU/BA/BF hubs are the same as are the ABS sensors for AUII/III BA BF.
Maybe you could contact ZF and ask them? |
||
| Top | |
||
| JOSE |
|
|||
|
have you rung up a tuner who knows their way around the BF ECU? its probably possible to flip one software switch to tell the ECU its recieving an input from a VSS and not an ABS module like suggested here http://www.fordmods.com/ford-interior-f14/hi-guys-au-vs-ba-speed-sender-t102627.html
_________________ Because i can. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 41 guests |
