|
| 1tuff |
|
|
|
I split the head on my xg, so thought it a good time to start tinkering, can i bolt the cylinder head from an au straight onto my block or should i get mine fixed and work it.
_________________ 94 XG 4L 5spd head shaved .015" stage 2 cam, ports cleaned up, bigger 1 piece inlet valve installed, pacemaker exstractors, no cat with full 2-1/2 inch pipe with sports muffler and weld drag lites. 198rwhp with no tune yet so hope to go to 210 once tuned. |
|
| Top | |
|
| Froudey |
|
||
|
1tuff wrote: I split the head on my xg, so thought it a good time to start tinkering, can i bolt the cylinder head from an au straight onto my block or should i get mine fixed and work it. AFAIK the AU head will drop straight onto the XG block, you won't see any preformace gains just a newish head. Also I woulnd't bother getting the cracked head fixed if you are keen on getting it worked get another decent head and get that worked.
_________________ Central West Cruise Mod... PM for Cruise and Event Ideas |
||
| Top | |
||
| the stig |
|
|
|
you can any head from ea to au. |
|
| Top | |
|
| cjh |
|
|
|
As long as you use the cam & rocker gear that go with that head.
_________________ You can't polish a turd, but you can roll it in glitter |
|
| Top | |
|
| 1tuff |
|
|
|
thanks for the info guys
_________________ 94 XG 4L 5spd head shaved .015" stage 2 cam, ports cleaned up, bigger 1 piece inlet valve installed, pacemaker exstractors, no cat with full 2-1/2 inch pipe with sports muffler and weld drag lites. 198rwhp with no tune yet so hope to go to 210 once tuned. |
|
| Top | |
|
| locknut |
|
||
|
Furthermore;
_________________ I like boost |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 0 guests |
