|
| sic xdub |
|
||
|
g'day guys, i no this has been posted before but has anyone had anything to with the tps from an ED falcon to an AU falcon, just wanted to no do this fit and is it true that you have to make holes a little wider, and can the ED maf sensor fit the AU maf, any help is appreciated
|
||
| Top | |
||
| sd1800 |
|
||
|
I'm pretty sure the plug for the TPS is different from the E Series > AU, so no it won't fit.
Also, as the AU ECU is tuned for a 65mm MAF the smaller E series one will play stupid games with the ECU.
_________________ Formerly LV XR5 Turbo, AU Fairmont Ghia V8 & EBII Fairmont I6. |
||
| Top | |
||
| sic xdub |
|
||
|
cheers, so how does alot of people get these to fit the older engine,
|
||
| Top | |
||
| sic xdub |
|
||
|
i got the au3 top end with the gt40p heads, explorer inlet and throttle body with blue injectors, so for all that to function good i know ill have to get it chip/tuned, probably wont run blue injectors. its in a patrol but you always want that bit more poke
|
||
| Top | |
||
| XR9UTE |
|
||
|
What catch code EEC are you running sico?
|
||
| Top | |
||
| One Drone |
|
|||
|
It should still fit on fine with a little modification as in drill the holes narrower. Once installed, adjust the position of the TPS before you tighten the screws to around 0.95v with a multimeter when the butterfly is fully closed.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| sic xdub |
|
||
|
1DGA or 1H14 are the only numbers i can see on the eec itself
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
