Hey people need some help.

I have so far undone the 6 bolts holding the fuel rail on to the manifold and the bolt for the fuel reg, undone and removed the fuel line and return fuel line, unclipped all the wiring to the injectors, its all loose but dont wanna come out.

I even removed all the little clips on the injectors in the hope the fuel rail would at least come off and the injectors stay there, but no good either.

So before I break something what have I missed or am doing wrong.

Jason

I think there are seven bolts, check the one holding the pressure regulator. I did this just the other day, just make sure all bolts are out and pull on the fuel rail, some injectors may stay in the manifold. I found to get them back in just use some of your own spit on the O rings. Let me know how you go.

Are you gonna be replacing your injectors?

Ben

Dammit i need to read better, "and the bolt for the FPR" just pull with all your might, it was a bastard for me the first time.

Ben

Dammit i need to read better, "and the bolt for the FPR" just pull with all your might, it was a bastard for me the first time.

Ben

I think the edit button is broken