Fordmods Logo

Installing Bosch Fuel Pump 

 

Page 1 of 1 [ 14 posts ] 

 
 Post subject: Installing Bosch Fuel Pump
Posted: Wed May 19, 2010 6:19 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 3186

Joined: 8th Nov 2004

Gallery: 6 images

Ride: EF Falcon

Location: Townsville
QLD, Australia

Hi,

I've been sent a Bosch fuel pump with a Snort performance kit I bought recently and I was trying to install it over the weekend.

It look radically different to the stock one.

Has anyone got any tips for how I should be progressing with this fuel pump?

I am trying to get hold of Geoff from Snort to make sure he sent me the right one, but he is damn hard to actually reach on the phone!

Image
Image


Cheers,

 

_________________

Nicco's M112 Blown, T-56 equipped EF
forums/viewtopic.php?t=68319

Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Wed May 19, 2010 8:59 pm 
Getting Side Ways
Offline

Age: 44

Posts: 1329

Joined: 5th Nov 2004

Ride: 66 Coupe

Location: Perth
WA, Australia

it will go, ive put them on the stock bracket before with clamps, you need to cut the bottom off the bracket, and also break away the plastic baffle on the bottom of the tank, also dont run too low on fuel as it will suck air earlier than the stock pump/
Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Thu May 20, 2010 3:28 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 3186

Joined: 8th Nov 2004

Gallery: 6 images

Ride: EF Falcon

Location: Townsville
QLD, Australia

Okay thanks man.

I'll chop him up when I get back.

For the clamp, do you mean a hose clamp? I'll pick one up to do it.

As for the baffle, do you mean the orange box in the bottom of the tank? Or is there a baffle right at the bottom i didn't see? Whats the reasoning behind removing that?

Sorry I'm asking dumb questions, i just am in really new territory for myself here.

Cheers,
Nic

 

_________________

Nicco's M112 Blown, T-56 equipped EF
forums/viewtopic.php?t=68319

Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Thu May 20, 2010 7:47 pm 
Getting Side Ways
Offline

Age: 44

Posts: 1329

Joined: 5th Nov 2004

Ride: 66 Coupe

Location: Perth
WA, Australia

Yeah a hose clamp, or even large (wide) cable ties will be fine.

The baffle - yeah the orange box/tub in the tank, as the pump wont fit in properly with it as it is (well i found anyway).
Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Sun May 30, 2010 3:26 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 3186

Joined: 8th Nov 2004

Gallery: 6 images

Ride: EF Falcon

Location: Townsville
QLD, Australia

Brett,

Cheers for the help mate, got it in and sorted today.

For anyone else who's interested, i need a 5/16" barb fitting put in the end of the pump and then used a small length of in-tank efi fuel hose (<2") andsome hose clamps to join it to the cradles line.

Cut the bottom off the cradle, hose clamp and she was apples.

Ended up removing the orange baffle too. Geoff from Snort reckons he can get them to fit but i was struggling on that one

 

_________________

Nicco's M112 Blown, T-56 equipped EF
forums/viewtopic.php?t=68319

Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Sun Nov 14, 2010 11:30 am 
Getting Side Ways
Offline
User avatar

Posts: 627

Joined: 5th Dec 2009

Gallery: 2 images

Ride: GREEN ED XR6

Power: 249 rwkw

Location: CENTRAL WEST QLD
QLD, Australia

Did you end up getting some pictures of the finished product? Im currently doing this too and was hoping for some insight?

 

_________________

AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED

Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Mon Nov 15, 2010 9:14 am 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 3186

Joined: 8th Nov 2004

Gallery: 6 images

Ride: EF Falcon

Location: Townsville
QLD, Australia

Hi mate,

This is the only finished picture of it I can find.

Image

 

_________________

Nicco's M112 Blown, T-56 equipped EF
forums/viewtopic.php?t=68319

Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Mon Nov 15, 2010 11:39 am 
Getting Side Ways
Offline

Age: 44

Posts: 1329

Joined: 5th Nov 2004

Ride: 66 Coupe

Location: Perth
WA, Australia

just make sure you dont run too low on fuel, due to the angle of the pump it will pick up air a lot earlier
Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Mon Nov 15, 2010 8:23 pm 
Getting Side Ways
Offline
User avatar

Posts: 627

Joined: 5th Dec 2009

Gallery: 2 images

Ride: GREEN ED XR6

Power: 249 rwkw

Location: CENTRAL WEST QLD
QLD, Australia

Did you remove the screw on fitting and install a brass fitting or did you use the one that was provided as Im trying to work it out that it can be mounted straight up and down rather than on a slant?

 

_________________

AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED

Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Wed Nov 17, 2010 1:06 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 3186

Joined: 8th Nov 2004

Gallery: 6 images

Ride: EF Falcon

Location: Townsville
QLD, Australia

took out the screw in fitting and replaced it with the barb.

and yeah, as brett said, don't run too low on fuel, it'll run out of love if you do! ha ha.

 

_________________

Nicco's M112 Blown, T-56 equipped EF
forums/viewtopic.php?t=68319

Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Thu Nov 18, 2010 8:14 am 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 3186

Joined: 8th Nov 2004

Gallery: 6 images

Ride: EF Falcon

Location: Townsville
QLD, Australia

bit below quarter tank, hooking around a LH corner was enough to make it cut out until i straightened up on the road.

Still drove good in a straight line like that though, just when it washed up the sides around the corner.

 

_________________

Nicco's M112 Blown, T-56 equipped EF
forums/viewtopic.php?t=68319

Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Thu Dec 02, 2010 10:03 pm 
Fordmods Newbie
Offline

Age: 58

Posts: 6

Joined: 23rd Jun 2010

Ride: ford falcon ed xr8

Location: rainbow beach
QLD, Australia

Hey Nicco,
Don't know if you know , but the screw you removed from your pump and replaced with a barb, is a check valve,that keeps pressure in the fuel line up to the fuel regulator. Is your car running ok with the new pump?
Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Fri Dec 03, 2010 8:17 am 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 3186

Joined: 8th Nov 2004

Gallery: 6 images

Ride: EF Falcon

Location: Townsville
QLD, Australia

Definitely just a barb.

The car is a bit hard to start though after it's been sitting a while. you might be onto something! ha ha :lol:

 

_________________

Nicco's M112 Blown, T-56 equipped EF
forums/viewtopic.php?t=68319

Top
 Profile  
 
 
 Post subject: Re: Installing Bosch Fuel Pump
Posted: Fri Dec 03, 2010 8:41 pm 
Fordmods Newbie
Offline

Age: 58

Posts: 6

Joined: 23rd Jun 2010

Ride: ford falcon ed xr8

Location: rainbow beach
QLD, Australia

Hey,
I'm doing the same thing with my pump, but I'm getting a brass fitting with a hose fitting end. Just
out of curiousity, the EA fuel pump holder has a steel bracket that holds the pump in place. Should go over the ribbed section of the pump and it bolts down to secure it in place. Thought you might be interested.
Regards
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 14 posts ] 

Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 7:12 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names