Fordmods Logo

Terrible idle, Stalls First Start 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: Terrible idle, Stalls First Start
Posted: Tue Dec 07, 2010 6:28 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 1651

Joined: 24th Nov 2005

Gallery: 12 images

Ride: DCII LTD V8

Location: Dunedin
New Zealand

Hi guys,

I'm hoping someone can help with this.

I recently swapped my 24lb injectors out for a set of AU 24lb injectors. When i first started the car up it idled pretty averagely. Now every time i start it up it will splutter and couch and then die, unless i give it some pedal which it will respond to after a small delay and roar. The idle is very rough and sounds like i have a huge cam in it. When I'm out driving, it feels like it's lacking a bit of power too.

Before i swapped the injectors i fitted them with new filters, caps orings etc.

I'm still suspicious about this ECU, i got the ECU from a guy on Fordmods who sold me my completely f**k gearbox, and the ECU's J3 port was open and looked a bit dusty etc. Car has never really ran perfect since the manual conversion. TPS and base idle is adjusted correctly, timing is fine, it just won't idle very well and feels a bit sluggish.

I'm going to get the codes read, but thought i would try my luck here first. I'll get a small vid recording too if it helps.

 

_________________

1993 LTD V8 Oregon 5 speed "click me"

Trick Flow Heads/Cam/Intake, Crane Ignition, T5Z Trans.

Top
 Profile  
 
 
 Post subject: Re: Terrible idle, Stalls First Start
Posted: Tue Dec 07, 2010 7:57 pm 
Oompa Loompa
Offline

Posts: 38

Joined: 23rd Jan 2008

Location: perth
WA, Australia

I don't know a lot so probably not right...... but I wonder if something is wrong with the new AU injectors? Maybe something to do with the spray pattern of the injectors?
Top
 Profile  
 
 
 Post subject: Re: Terrible idle, Stalls First Start
Posted: Tue Dec 07, 2010 8:02 pm 
Tyre Shredder
Offline

Age: 32

Posts: 371

Joined: 6th Jan 2009

Gallery: 21 images

Location: mackay
QLD, Australia

did you have the au injectorts cleaned and spray patteren checked before installin them?

 

_________________

xb falcon 500: currently being striped for full respray
ef falcon gli wagooon: currently finishing bodykit and then doors closed respray
the-garage-f53/ef-wagon-kit-pics-up-t77713.html

Top
 Profile  
 
 
 Post subject: Re: Terrible idle, Stalls First Start
Posted: Wed Dec 08, 2010 8:44 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 1651

Joined: 24th Nov 2005

Gallery: 12 images

Ride: DCII LTD V8

Location: Dunedin
New Zealand

No i didn't get them flow checked. They came out of a low k AUIII so i gathered they would be OK. I gave them new filter baskets, pintle caps, o-rings etc.

If i leave it overnight and start it in the morning it really chokes and coughs for a bit, almost like an injector is leaking into a cylinder.

I think i'll just put the old 24lb'ers back in. Although even with the old ones the idle wasn't smooth as it could be. Maybe a J3 chip will sort it.

 

_________________

1993 LTD V8 Oregon 5 speed "click me"

Trick Flow Heads/Cam/Intake, Crane Ignition, T5Z Trans.

Top
 Profile  
 
 
 Post subject: Re: Terrible idle, Stalls First Start
Posted: Wed Dec 08, 2010 9:28 pm 
Tyre Shredder
Offline

Age: 32

Posts: 371

Joined: 6th Jan 2009

Gallery: 21 images

Location: mackay
QLD, Australia

yeh mayb probly worth a clean if they sat in the car a bit before you puleld them out

 

_________________

xb falcon 500: currently being striped for full respray
ef falcon gli wagooon: currently finishing bodykit and then doors closed respray
the-garage-f53/ef-wagon-kit-pics-up-t77713.html

Top
 Profile  
 
 
 Post subject: Re: Terrible idle, Stalls First Start
Posted: Sat Dec 11, 2010 2:27 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 1651

Joined: 24th Nov 2005

Gallery: 12 images

Ride: DCII LTD V8

Location: Dunedin
New Zealand

Here is the idle: http://s31.photobucket.com/albums/c364/ ... V02258.mp4

And here is the start with a slightly better idle: http://s31.photobucket.com/albums/c364/ ... V02256.mp4

 

_________________

1993 LTD V8 Oregon 5 speed "click me"

Trick Flow Heads/Cam/Intake, Crane Ignition, T5Z Trans.

Top
 Profile  
 
 
 Post subject: Re: Terrible idle, Stalls First Start
Posted: Sat Dec 11, 2010 4:53 pm 
Tyre Shredder
Offline

Age: 32

Posts: 371

Joined: 6th Jan 2009

Gallery: 21 images

Location: mackay
QLD, Australia

turn the idle up a lil mayb looked like it was only at 600rpm?

 

_________________

xb falcon 500: currently being striped for full respray
ef falcon gli wagooon: currently finishing bodykit and then doors closed respray
the-garage-f53/ef-wagon-kit-pics-up-t77713.html

Top
 Profile  
 
 
 Post subject: Re: Terrible idle, Stalls First Start
Posted: Wed Dec 15, 2010 8:14 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 1651

Joined: 24th Nov 2005

Gallery: 12 images

Ride: DCII LTD V8

Location: Dunedin
New Zealand

kelv_05ef_wagon wrote:
turn the idle up a lil mayb looked like it was only at 600rpm?


Was fine before the injector swap, it sits about 750-850rpm, it's only idling that low in the video because it's lumpy as hell. It's got me stumped.

 

_________________

1993 LTD V8 Oregon 5 speed "click me"

Trick Flow Heads/Cam/Intake, Crane Ignition, T5Z Trans.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Mar 30, 2024 1:55 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names