|
| tickford_6 |
|
|||
|
Jonathan Kakousidis wrote: Double face plam dumb a** cant belive i missed that should read properly first not just skim over the top  I've seen it before too, same thing happened same bent rod. The water run on the bottom of the manifold untill it hits the back of the plenum, then shoots up number 6 runner. When I was a first year apprentice, it was my first ever engine rebuild, Falcon ute drove through water and bent number 6. (the utes still had the log manifold at that point.)
_________________ what a joke. |
|||
| Top | |
|||
| racedirector |
|
|||
Age: 52 Posts: 1541 Joined: 20th Mar 2005 Ride: EDL GLI Fairmont Wagon :) Location: Riverstone |
Watching this one with interest, I just happen to have one of these engines in my wagon. Hoping to find out what is needed to put an XR6 cam and 300kpa reg on mine in the future.....
_________________ =1994 ED Wagon GLi body/EL Fairmont spec with *ALL* EL running gear.= |
|||
| Top | |
|||
| tickford_6 |
|
|||
|
racedirector wrote: Watching this one with interest, I just happen to have one of these engines in my wagon. Hoping to find out what is needed to put an XR6 cam and 300kpa reg on mine in the future..... Keep up the good work tickford_6, there are those that are interested in what you have to say and post... Cheers RD There is a Hybrid specific XR cam. the 300kpa reg is not a specific part and could be sourced from a regular engine or bought new.
_________________ what a joke. |
|||
| Top | |
|||
| racedirector |
|
|||
Age: 52 Posts: 1541 Joined: 20th Mar 2005 Ride: EDL GLI Fairmont Wagon :) Location: Riverstone |
Thanks matey
_________________ =1994 ED Wagon GLi body/EL Fairmont spec with *ALL* EL running gear.= |
|||
| Top | |
|||
| tickford_6 |
|
|||
|
racedirector wrote: Thanks matey I was actually hoping to use the "standard" XR6 cam I already have by, if possible, changing the springs, cam and rockers to standard ones. I also already have the fuel reg, this damn hybrid thing is just getting in my way......  Cheers RD The conical springs from the Hybrid are better then the old style parallel springs. To use the pre hybrid cam would only mean swapping the rocker gear.
_________________ what a joke. |
|||
| Top | |
|||
| twase |
|
|||
|
Quote: Con Rod Nuts & Bolts (WR2A stamped on bolt) – torque to yield Hmmm... wonder if this is wildly known.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| racedirector |
|
|||
Age: 52 Posts: 1541 Joined: 20th Mar 2005 Ride: EDL GLI Fairmont Wagon :) Location: Riverstone |
tickford_6 wrote: racedirector wrote: Thanks matey I was actually hoping to use the "standard" XR6 cam I already have by, if possible, changing the springs, cam and rockers to standard ones. I also already have the fuel reg, this damn hybrid thing is just getting in my way...... Cheers RD The conical springs from the Hybrid are better then the old style parallel springs. To use the pre hybrid cam would only mean swapping the rocker gear. Excellent news, standard rockers it 'tis! Sorry for hijacking your thread, back to the subject at hand. Cheers RD
_________________ =1994 ED Wagon GLi body/EL Fairmont spec with *ALL* EL running gear.= |
|||
| Top | |
|||
| tickford_6 |
|
|||
|
twase wrote: Quote: Con Rod Nuts & Bolts (WR2A stamped on bolt) – torque to yield Hmmm... wonder if this is wildly known. Probably not. Wonder how many sets of bolts ford still has in stock? As by rights they should be replaced if they are ever loosened off. Which then according to good engine building practice the big ends should be closed and honed when the new bolts are fitted. Probably cheaper to just buy a new set of rods.
_________________ what a joke. |
|||
| Top | |
|||
| TRB40 |
|
||
|
just a question im sure all the engine might be the same but im build a au3 engine but was wondering what holds the cam in place as the rocker gear mount block havent had contact with the cam |
||
| Top | |
||
| Troyman |
|
||
|
the pressure from the valve springs hold it in place. you could almost say its a floating cam..
_________________ ED XR6 TURBO, 267rwkw@12psi..AU GHIA TURBO, 216rwkw@7psi...AU GHIA, stock. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 0 guests |
