|
| DARK_EF |
|
|||
|
Quote: All over eBay Here's the one I bought, better than t5 LEDs Would these work in an EF cluster? |
|||
| Top | |
|||
| daniboy232 |
|
||
|
They should work on your ef cluster, im like 99% sure, but just to make certain buy one pair to see if it fits, its only 2bucks
http://www.ebay.com.au/itm/T10-car-Blue ... 158wt_1139 |
||
| Top | |
||
| teeroy |
|
|||
|
t10's are too big aren't they unless your swapping globe holders and finding a way to get them in?
t5's from jaycar are simple plug and play, $2 or so each, only need 6 to do the basics. just sand the tip flat and sand to frost, spreads the light a bit better. mine has one small dark patch at the lower end of speedo, but i can't complain, would love smd leds for better spread though.
_________________ be good or be good at it. |
|||
| Top | |
|||
| na not accelerant |
|
||
|
kinda read page 1, so if this questioned has been asked already on this thread , just let me know what page number please. just wondering, how would you change the color of the lights in a digital dash? is it impossible? in my na its an orange color except for the speedo,revs,fuel n temp. is this conversion (i would change to blue) still possible for me?
thanks in advance for your answer/reply |
||
| Top | |
||
| Elwagon91 |
|
||
|
Every light in my car is blue some of them I hard wired in some on them just plug in I payed like not even 20$$ eBay the lights u need t10 and I think it's t5? Stuff paying 100$ but there are 3 different lights u need in your car
_________________ 94 ef fairmont wagon |
||
| Top | |
||
| hondo |
|
||
|
Quote: I did LED conversion on my AU Dash to Blue. Bought the LEDs on EBay for a $1.00 each. Sent from Hong Kong they have holders on them and all. If anyone interested I will find the name of the eBay store and let you know. 6 Led's required for each dash cluster. 96ghia wrote: Howdy folks.
After doing some research, I have made a small Excel file that calculates how much a LED conversion will cost, based on how many globes in the dash you are changing. I've based the Globe holders on Thomson Fords pricing, and the LEDS based on http://www.ledshoponline.com/automotive_leds_wedge_bulb.htm Its here. Have fun. EDIT: Macca has uploaded the Excel chart, he didn't realise he had it saved. |
||
| Top | |
||
| hondo |
|
||
|
na not accelerant wrote: kinda read page 1, so if this questioned has been asked already on this thread , just let me know what page number please. just wondering, how would you change the color of the lights in a digital dash? is it impossible? in my na its an orange color except for the speedo,revs,fuel n temp. is this conversion (i would change to blue) still possible for me? thanks in advance for your answer/reply Hi I left and answer about blue dash LED's further down if you care to read. Cheers. |
||
| Top | |
||
| LittleBeddy• |
|
||
|
Hi there, I'm new to these forums but have used them to help me do my dash conversion. Ive converted all my lights to blue except for the LCD on the clImate control, it's still a gross orange. I was unable to find any info on converting the LCD screen to blue. Does anyone know how to do it?
|
||
| Top | |
||
| EF_wanabe |
|
||
|
ammmmm so T8 or T5 for EA-ED ? ?????
will need to get sober and read up the excel document |
||
| Top | |
||
| TROYMAN |
|
||
|
EF_wanabe wrote: ammmmm so T8 or T5 for EA-ED ? ????? will need to get sober and read up the excel document ea to ed use t10 globes |
||
| Top | |
||
| EF_wanabe |
|
||
|
TROYMAN wrote: EF_wanabe wrote: ammmmm so T8 or T5 for EA-ED ? ????? will need to get sober and read up the excel document ea to ed use t10 globes ok so wedge type and they slip straight in ? |
||
| Top | |
||
| EF_wanabe |
|
||
|
forgot to mention behind the cluster i was wanting for , i couldn't care less for my exterior indicator's
|
||
| Top | |
||
| TROYMAN |
|
||
|
yes, the ea to ed cluster uses the t10 wedge globes that just push in..
|
||
| Top | |
||
| EF_wanabe |
|
||
|
TROYMAN wrote: yes, the ea to ed cluster uses the t10 wedge globes that just push in.. awesome so its just as if you are changing a ordinary globe expect there is polarity involved and then i guess its the same for the cigarette lighter in the center, and my trip computer would be the same , then comes the A/C T10s ? still thank you so much for putting up with my laziness |
||
| Top | |
||
| TROYMAN |
|
||
|
EF_wanabe wrote: TROYMAN wrote: yes, the ea to ed cluster uses the t10 wedge globes that just push in.. awesome so its just as if you are changing a ordinary globe expect there is polarity involved and then i guess its the same for the cigarette lighter in the center, and my trip computer would be the same , then comes the A/C T10s ? still thank you so much for putting up with my laziness well the a/c panel is a dificult one, the are a different style and type of globe again,,they are a screw in type lug with the globe attached.. the cig lighter and ashtray are t5 globes and the trip comp is a t10 wedge like the cluster.. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
