Fordmods Logo

using mig wire or brass welding rod with a butane torch 

 

Page 1 of 1 [ 13 posts ] 

 
 Post subject: using mig wire or brass welding rod with a butane torch
Posted: Fri Oct 12, 2012 1:45 pm 
Getting Side Ways
Offline

Age: 23

Posts: 636

Joined: 5th Jan 2008

Location: Egg
SA, Australia

hi

can a radiator support panel be spot welded using a butane torch and a brass oxy welding rod or mig wire going to get one welded in and wanted to know

how would you use mig wire or brass welding rods with a butane torch to weld light steel
Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Fri Oct 12, 2012 2:25 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

nope..........
Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Fri Oct 12, 2012 3:36 pm 
Getting Side Ways
Offline

Age: 47

Posts: 4604

Joined: 23rd Nov 2006

Gallery: 4 images

Ride: 5.0 AU's and 5.0 Maverick

Power: 139 rwkw

Location: Sydney West
NSW, Australia

Nope you wont get enough heat and it wont be concentrated in a small area for it to work.
Welding steel is a bit different to fixing water pipes!

 

_________________

xr6turnip wrote:
More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around!

Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Fri Oct 12, 2012 5:49 pm 
Getting Side Ways
Offline

Age: 23

Posts: 636

Joined: 5th Jan 2008

Location: Egg
SA, Australia

what else can you use besides a mig welder
Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Fri Oct 12, 2012 5:52 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

a spot welder, a arch welder,

f**k it, just use tech screws :lol: :lol:
Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Fri Oct 12, 2012 6:13 pm 
Tyre Shredder
Offline
User avatar

Age: 58

Posts: 358

Joined: 7th Jun 2007

Ride: NA Fairlane / FE LTD

Location: bayswater
VIC, Australia

TROYMAN wrote:
f**k it, just use tech screws :lol: :lol:


And a bigga hammer
Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Fri Oct 12, 2012 6:14 pm 
Getting Side Ways
Offline

Age: 47

Posts: 4604

Joined: 23rd Nov 2006

Gallery: 4 images

Ride: 5.0 AU's and 5.0 Maverick

Power: 139 rwkw

Location: Sydney West
NSW, Australia

Light f@rt?

 

_________________

xr6turnip wrote:
More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around!

Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Fri Oct 12, 2012 6:57 pm 
Getting Side Ways
Offline

Age: 42

Posts: 9452

Joined: 9th Nov 2004

Gallery: 4 images

Ride: Fordrunner 5.0 Turbo

Location: Wollongong
NSW, Australia

Sikaflex? Like on a commodore?

Just hire an oxy kit if cash is a bit tight.
Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Fri Oct 12, 2012 11:02 pm 
Getting Side Ways
Offline

Posts: 791

Joined: 18th Mar 2005

Gallery: 4 images

Location: Adelaide
SA, Australia

it'll pobably end in tears but, if you are VERY careful and use the smallest rods you can lay your hands on, lowest amperage you can on an arc welder and tack only......I have in the past but its very easy to blow holes....

 

_________________

351 4V XB Coupe running LPG

Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Sat Oct 13, 2012 8:37 am 
Getting Side Ways
Offline

Age: 32

Posts: 789

Joined: 9th Dec 2011

Ride: S1 eb 5speed

Location: Coffs Harbour
NSW, Australia

Tech screws and sika sounds good
Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Sat Oct 13, 2012 12:19 pm 
NSW Cruise Moderator
Offline
User avatar

Age: 46

Posts: 7338

Joined: 5th Nov 2004

Gallery: 12 images

Ride: TE50

Location: ɹǝpun uʍop
NSW, Australia

Paper Mache? Clag glue? Semen? All have similar bonding properties and appear to fit the budget.

 

_________________

Image

I have a car.

Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Sat Oct 13, 2012 12:42 pm 
Getting Side Ways
Offline

Age: 47

Posts: 4604

Joined: 23rd Nov 2006

Gallery: 4 images

Ride: 5.0 AU's and 5.0 Maverick

Power: 139 rwkw

Location: Sydney West
NSW, Australia

We have all missed the obvious answer.
EGG beaten and left in the sun once applied.

 

_________________

xr6turnip wrote:
More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around!

Top
 Profile  
 
 
 Post subject: Re: using mig wire or brass welding rod with a butane torch
Posted: Sat Oct 13, 2012 5:48 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

nalane wrote:
TROYMAN wrote:
f**k it, just use tech screws :lol: :lol:


And a bigga hammer



GAFFA TAPE / ZIP TIES :mrgreen:

 

_________________

RIP SCOTT

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 13 posts ] 

Who is online

Users browsing this forum: No registered users and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 8:15 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names