Fordmods Logo

Home » Forums » Fordmods Tech » V8 Workshop

ED V8 Cam Question 

 

Page 2 of 2 [ 25 posts ] Go to page Previous  1, 2

Post New Topic Post Reply  Previous topic Next topic
 
67RCE
 Post subject: Re: ED V8 Cam Question
Posted: Tue May 28, 2013 5:04 pm 
Getting Side Ways
Offline

Age: 35

Posts: 4183

Joined: 30th May 2005

Ride: 1993 EB XR8

Location: BrisVegas
QLD, Australia
Also, 1.6 or 1.7:1 rockers?

 

_________________

ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam.

OO0Y4 - BA2 XR6 Turbo, Nizpro Plenum, Process West stage 3 cooler, 4” dump, 3.5” exhaust, ID1000’s, ZF Auto - 11.8@116
Top
 Profile  
 
 
BOTTLEDUP
 Post subject: Re: ED V8 Cam Question
Posted: Tue May 28, 2013 5:56 pm 
Getting Side Ways
Offline
User avatar

Age: 45

Posts: 662

Joined: 14th Jan 2007

Ride: T1 TE50 P01

Location: Perth NoR
WA, Australia
1.7s for sure. Scorpion make a 1.72:1 which will give you 0.550" lift with either of the XE270 grinds.

 

_________________

TE50 T1 P01
Top
 Profile  
 
 
67RCE
 Post subject: Re: ED V8 Cam Question
Posted: Tue May 28, 2013 6:02 pm 
Getting Side Ways
Offline

Age: 35

Posts: 4183

Joined: 30th May 2005

Ride: 1993 EB XR8

Location: BrisVegas
QLD, Australia
Cheers Dave. Should make for a stout combo, especially with a shot of gas in there aswell.

 

_________________

ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam.

OO0Y4 - BA2 XR6 Turbo, Nizpro Plenum, Process West stage 3 cooler, 4” dump, 3.5” exhaust, ID1000’s, ZF Auto - 11.8@116
Top
 Profile  
 
 
banarcus
 Post subject: Re: ED V8 Cam Question
Posted: Wed Jun 19, 2013 9:38 am 
Getting Side Ways
Offline
User avatar

Age: 49

Posts: 1093

Joined: 29th Nov 2004

Gallery: 15 images

Ride: BA Ford Fairlane V8

Location: Lower Hunter Valley
NSW, Australia
67RCE wrote:
Figured I'd bump this thread. My EB is getting pulled down very soon, and I'm considering a cam swap. Would the E303 work well with ported E7's until I get my hands on a set of GT40P's, or is it not worthwhile at this stage? The ported E7's are already on the car, so it's not like I'm wasting money porting them myself. Looking at Cost vs Benefit. I've also got Pacemakers, Twin 2.25" into single 3" exhaust, Explorer manifold and a 65mm Throttle body.


Exactly what I had in my old wagon V8. Ported E7s, 65mm TB, Pacies, twin 2.5" into 3", Explorer inlet and E303. Don't know what numbers it made but it went a lot harder than stock, especially when it was a manual.

 

_________________

Interested in a fair go for the Hunter-New England area of NSW?
Top
 Profile  
 
 
XR9UTE
 Post subject: Re: ED V8 Cam Question
Posted: Wed Jun 19, 2013 11:20 am 
EFI Guru
Offline

Age: 58

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia
Just remember piston to valve 67RCE,
Have you got yourself a 1/4 horse? The E cam can be a bit of a bastard with idle.
Top
 Profile  
 
 
67RCE
 Post subject: Re: ED V8 Cam Question
Posted: Wed Jun 19, 2013 12:51 pm 
Getting Side Ways
Offline

Age: 35

Posts: 4183

Joined: 30th May 2005

Ride: 1993 EB XR8

Location: BrisVegas
QLD, Australia
XR9UTE wrote:
Just remember piston to valve 67RCE,
Have you got yourself a 1/4 horse? The E cam can be a bit of a bastard with idle.

The RHS heads fell through, now got a complete AU 5L going in. Now unsure what I will do.

 

_________________

ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam.

OO0Y4 - BA2 XR6 Turbo, Nizpro Plenum, Process West stage 3 cooler, 4” dump, 3.5” exhaust, ID1000’s, ZF Auto - 11.8@116
Top
 Profile  
 
 
BOTTLEDUP
 Post subject: Re: ED V8 Cam Question
Posted: Wed Jun 19, 2013 12:55 pm 
Getting Side Ways
Offline
User avatar

Age: 45

Posts: 662

Joined: 14th Jan 2007

Ride: T1 TE50 P01

Location: Perth NoR
WA, Australia
Is it a 200 or 220 AU engine?

 

_________________

TE50 T1 P01
Top
 Profile  
 
 
67RCE
 Post subject: Re: ED V8 Cam Question
Posted: Wed Jun 19, 2013 9:25 pm 
Getting Side Ways
Offline

Age: 35

Posts: 4183

Joined: 30th May 2005

Ride: 1993 EB XR8

Location: BrisVegas
QLD, Australia
It's a Series 1 engine, so 185. But it was a price to good to refuse

 

_________________

ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam.

OO0Y4 - BA2 XR6 Turbo, Nizpro Plenum, Process West stage 3 cooler, 4” dump, 3.5” exhaust, ID1000’s, ZF Auto - 11.8@116
Top
 Profile  
 
 
BOTTLEDUP
 Post subject: Re: ED V8 Cam Question
Posted: Thu Jun 20, 2013 1:11 am 
Getting Side Ways
Offline
User avatar

Age: 45

Posts: 662

Joined: 14th Jan 2007

Ride: T1 TE50 P01

Location: Perth NoR
WA, Australia
Still a good base for some cost effective mods. 1.7 rockers, Crow spring kit, little Comp XE cam and it will be a great little combo.

 

_________________

TE50 T1 P01
Top
 Profile  
 
 
67RCE
 Post subject: Re: ED V8 Cam Question
Posted: Thu Jun 20, 2013 1:16 am 
Getting Side Ways
Offline

Age: 35

Posts: 4183

Joined: 30th May 2005

Ride: 1993 EB XR8

Location: BrisVegas
QLD, Australia
Good enough to run a 13 on the bottle through an auto. If I crank it with the C4 I'll be stoked.

 

_________________

ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam.

OO0Y4 - BA2 XR6 Turbo, Nizpro Plenum, Process West stage 3 cooler, 4” dump, 3.5” exhaust, ID1000’s, ZF Auto - 11.8@116
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 2 of 2  [ 25 posts ]  Go to page Previous  1, 2
Jump to:  

Home » Forums » Fordmods Tech » V8 Workshop

Who is online

Users browsing this forum: No registered users and 15 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Apr 24, 2024 7:15 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names