Fordmods Logo

popping noise after fitting new head unit 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: popping noise after fitting new head unit
Posted: Fri Sep 06, 2013 10:30 pm 
Parts Gopher
Offline

Age: 32

Posts: 62

Joined: 13th Apr 2011

Gallery: 3 images

Ride: ef fairmont ghia

Location: hoppers crossing
VIC, Australia

Hi all so tonight I installed a new head unit in my car. the previous installer hadn't connected all the speakers so I did that while I was there.

so I put it back together and tested it I worked with no worries.

I then went for a drive and noticed that it was making a popping or clicking noise that was relative to engine speed eg more revs more frequent clicks and a little louder as well..

I used all the same wiring from the previous job so im not sure wether its earth or something else?

any help or suggestions would be appreciated
Top
 Profile  
 
 
 Post subject: Re: popping noise after fitting new head unit
Posted: Sat Sep 07, 2013 8:08 am 
Smokin em up
Offline
User avatar

Age: 39

Posts: 218

Joined: 17th Sep 2012

Gallery: 3 images

Ride: EL Fairmont

Power: 12 rwkw

Location: in the 'beff
SA, Australia

Are you running an amp? Only reason I ask is it sounds like when you run the amp signal wire with the power cable.

 

_________________

EL Mont- mods: 2.5" catback, clear indicator repeaters.

Planned mods: Boooooooooooooossssssssst :D

Top
 Profile  
 
 
 Post subject: Re: popping noise after fitting new head unit
Posted: Sat Sep 07, 2013 5:49 pm 
Parts Gopher
Offline

Age: 32

Posts: 62

Joined: 13th Apr 2011

Gallery: 3 images

Ride: ef fairmont ghia

Location: hoppers crossing
VIC, Australia

Nah no amp. I should of mentioned that. But it's all good now did some testing and for some reason it's coming through the antenna. I searched around and you can buy antenna noise filters of eBay for under 20 bucks so ill give that a go
Top
 Profile  
 
 
 Post subject: Re: popping noise after fitting new head unit
Posted: Sat Sep 07, 2013 7:44 pm 
Stock as a Rock
Offline

Age: 34

Posts: 182

Joined: 9th Jan 2011

Gallery: 4 images

Ride: 2004 ba xr6 turbo

Location: sydney
NSW, Australia

or there is an earth fault somewhere between you're antenna and input connector behind your head unit, if the cable has a split somewhere along the way and is rubbing against any exposed metal in your car, this will cause your popping/alternator whine noise... and a filter wont do anything if its the case
Top
 Profile  
 
 
 Post subject: Re: popping noise after fitting new head unit
Posted: Sun Oct 27, 2013 8:17 pm 
Technical Contributor
Offline
User avatar

Age: 32

Posts: 676

Joined: 7th Jun 2009

Ride: Ford EB II Falcon

Location: Morphett Vale
SA, Australia

Earths can cause many things, this being one of those, I would find a new ground location, sand back any paint, clean it up with degreaser and then bolt your ground tightly to that, otherwise as a test run the headunit ground wire directly back to the negative post of the battery and see what happens.

 

_________________

OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing !

NEW CAR: 1996 TE Magna...Mods Soon To Come

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Apr 19, 2024 11:53 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names