Fordmods Logo

Vacuum hoses on MPFI manifold locations 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: Vacuum hoses on MPFI manifold locations
Posted: Sun Apr 20, 2014 12:52 pm 
Stock as a Rock
Offline
User avatar

Age: 37

Posts: 123

Joined: 2nd Apr 2007

Gallery: 13 images

Ride: 3x Toranas

Location: Salisbury
SA, Australia

Gday guys,

just pretty much finished my CPI to MPFI conversion for my EA.

I just need to plug in the vacuum lines coming out/ in the new intake manifold. Ill post some pics up and questions are as follows

First pic, the white tree at the back of the manifold
Image

#1 - where does this go?
#2 - Where does this go?
#3 - already connected to the brake booster.
#4 - whats this?

Black 2 way tree in the middle of the manifold

Image
#5- does this smaller one connect to a hose that goes out of the bay into a black box inside the passenger guard?
#6- is this the PCV valve, a hose comes off this and connects into the top of the rocker cover?

Image
Smaller arrow: where does this go?
Bigger arrow: This is the hose im talking about (#5)


Will appreciate any help in relation to this.
While i'm at it, my MPFI loom didnt have the blue wire that goes to earth. Is it going to be a problem?
Secondly the little pink wire is also not on my MPFI loom. If I do need to connect this, where can I tap into?

Cheers!

 

_________________

Image

Top
 Profile  
 
 
 Post subject: Re: Vacuum hoses on MPFI manifold locations
Posted: Sun Apr 20, 2014 2:19 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

TheAng wrote:
Gday guys,

just pretty much finished my CPI to MPFI conversion for my EA.

I just need to plug in the vacuum lines coming out/ in the new intake manifold. Ill post some pics up and questions are as follows

First pic, the white tree at the back of the manifold
Image

#1 - where does this go?
#2 - Where does this go?
#3 - already connected to the brake booster.
#4 - whats this?

Black 2 way tree in the middle of the manifold

Image
#5- does this smaller one connect to a hose that goes out of the bay into a black box inside the passenger guard?
#6- is this the PCV valve, a hose comes off this and connects into the top of the rocker cover?

Image
Smaller arrow: where does this go?
Bigger arrow: This is the hose im talking about (#5)


Will appreciate any help in relation to this.
While i'm at it, my MPFI loom didnt have the blue wire that goes to earth. Is it going to be a problem?
Secondly the little pink wire is also not on my MPFI loom. If I do need to connect this, where can I tap into?

Cheers!



#1 & 2 go to the vacuum lines for inside the cab to activate vacuum servos for the dash vents.( green and black nylon tubes ???)
#3 is for the brake booster,
#4 is for the MAP sensor hose, and immediatley below it is the IAT sensor,
#5 is for the Purge Solenoid vacuum hose,
#6 is where the PCV hose connects to.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: Re: Vacuum hoses on MPFI manifold locations
Posted: Sun Apr 20, 2014 6:28 pm 
Stock as a Rock
Offline
User avatar

Age: 37

Posts: 123

Joined: 2nd Apr 2007

Gallery: 13 images

Ride: 3x Toranas

Location: Salisbury
SA, Australia

Thanks cjh, helped alot!

Now that all vacuum lines are connected, i'm hoping someone could answer the second part of my post as I think this might be causing some issues at the moment


"my MPFI loom didnt have the blue wire that goes to earth. Is it going to be a problem?
Secondly the little pink wire is also not on my MPFI loom. If I do need to connect this, where can I tap into?"

 

_________________

Image

Top
 Profile  
 
 
 Post subject: Re: Vacuum hoses on MPFI manifold locations
Posted: Mon Apr 21, 2014 1:03 am 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

cjh wrote:


#1 & 2 go to the vacuum lines for inside the cab to activate vacuum servos for the dash vents.( green and black nylon tubes ???)
#3 is for the brake booster,
#4 is for the MAP sensor hose, and immediatley below it is the IAT sensor,
#5 is for the Purge Solenoid vacuum hose,
#6 is where the PCV hose connects to.


almost,
1 is for fuel reg
2 is for heater controls..
the rest is right...
Top
 Profile  
 
 
 Post subject: Re: Vacuum hoses on MPFI manifold locations
Posted: Mon Apr 21, 2014 12:50 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

TROYMAN wrote:
cjh wrote:


#1 & 2 go to the vacuum lines for inside the cab to activate vacuum servos for the dash vents.( green and black nylon tubes ???)
#3 is for the brake booster,
#4 is for the MAP sensor hose, and immediatley below it is the IAT sensor,
#5 is for the Purge Solenoid vacuum hose,
#6 is where the PCV hose connects to.


almost,
1 is for fuel reg
2 is for heater controls..
the rest is right...


Ta.....I was relying on memmory.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: Re: Vacuum hoses on MPFI manifold locations
Posted: Mon Apr 21, 2014 5:38 pm 
Stock as a Rock
Offline
User avatar

Age: 37

Posts: 123

Joined: 2nd Apr 2007

Gallery: 13 images

Ride: 3x Toranas

Location: Salisbury
SA, Australia

thanks fellas, all hoses accounted for now.

Cheers

 

_________________

Image

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 63 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 10:08 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names