Fordmods Logo

XF - AU VCT conversion, engine wiring diagram needed please 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: XF - AU VCT conversion, engine wiring diagram needed please
Posted: Thu Apr 17, 2014 12:06 pm 
Fordmods Newbie
Offline

Age: 56

Posts: 16

Joined: 24th Sep 2013

Ride: XF Falcon ute

Location: shepparton
VIC, Australia

This is my first post so hope I have put this in the right forum.

I have just finished putting an AU VCT engine with 4 speed auto into my XF ute, I have found the engine harness diagram and ECU pin outs for an ef but really need a copy of the engine wiring diagrams for an AU with the VCT engine.
Can anyone help out? I have worked out most of it but there are a few areas I'm not sure of and the proper diagram would help heaps.

If anyone is contemplating doing this swap I have taken heaps of progress photos that may help others if interested.

Thanks,
Top
 Profile  
 
 
 Post subject: Re: XF - AU VCT conversion, engine wiring diagram needed please
Posted: Sat Apr 19, 2014 7:29 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

Get an AU series workshop manual.....you'll need it for future hassels anyway.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: Re: XF - AU VCT conversion, engine wiring diagram needed please
Posted: Sat Apr 19, 2014 7:32 pm 
Technical Contributor
Offline

Age: 66

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Offered the AU Manual as a PDF.

Still waiting for Email address to send it to you.
Top
 Profile  
 
 
 Post subject: Re: XF - AU VCT conversion, engine wiring diagram needed please
Posted: Sun Apr 20, 2014 12:28 pm 
Fordmods Newbie
Offline

Age: 56

Posts: 16

Joined: 24th Sep 2013

Ride: XF Falcon ute

Location: shepparton
VIC, Australia

Thanks for the replies, pm sent SWC, first time didn't go through obviously. Using Google Chrome now, seems to be working better on my computer.

cheers,

 

 

Attachments:
File comment: bit more to do still,
2014-04-18 20.37.26.jpg
2014-04-18 20.37.26.jpg [ 131.52 KiB | Viewed 555 times ]

Last edited by xfute4.0 on Sun Apr 20, 2014 12:38 pm, edited 1 time in total.

Top
 Profile  
 
 
 Post subject: Re: XF - AU VCT conversion, engine wiring diagram needed please
Posted: Sun Apr 20, 2014 12:32 pm 
Technical Contributor
Offline

Age: 66

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Went to send it and it was too big.

See if these downloads work.

http://www.fordaustraliaforums.com/foru ... 49462.html

http://www.allcarmanuals.com/factory-se ... on-AU.html

http://kickass.to/2001-ford-falcon-au-w ... 59121.html

http://manualmadness.com/ford-au-falcon ... op-manual/

Sorry that I couldn't send you the one I have, but one of these should help you out.

Sent by PM as well.
Top
 Profile  
 
 
 Post subject: Re: XF - AU VCT conversion, engine wiring diagram needed please
Posted: Sun Apr 20, 2014 12:41 pm 
Fordmods Newbie
Offline

Age: 56

Posts: 16

Joined: 24th Sep 2013

Ride: XF Falcon ute

Location: shepparton
VIC, Australia

Ok thanks again, I was thinking about buying a Haynes manual but haven't done so yet, mainly from previous experience with these manuals.
Top
 Profile  
 
 
 Post subject: Re: XF - AU VCT conversion, engine wiring diagram needed please
Posted: Sun Apr 20, 2014 3:55 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3925

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

dunno about haynes .. won't use gregory's [crap] but picked up a coupla max ellory's for EF/EL & AU which seem ok
Top
 Profile  
 
 
 Post subject: Re: XF - AU VCT conversion, engine wiring diagram needed please
Posted: Sun Apr 20, 2014 4:34 pm 
Fordmods Newbie
Offline

Age: 56

Posts: 16

Joined: 24th Sep 2013

Ride: XF Falcon ute

Location: shepparton
VIC, Australia

Gotten a lot of use out of the Gregory's one for the xf over the years, the numbers and letters on the wiring diagrams are hard to read though, have to be enlarged, and the old SP (scientific publications) ones are also good,

Attachment:
2014-04-20 15.20.57.jpg
2014-04-20 15.20.57.jpg [ 66.83 KiB | Viewed 380 times ]

Attachment:
2014-04-20 15.20.18.jpg
2014-04-20 15.20.18.jpg [ 138.47 KiB | Viewed 390 times ]
Top
 Profile  
 
 
 Post subject: Re: XF - AU VCT conversion, engine wiring diagram needed please
Posted: Sun Apr 20, 2014 5:44 pm 
Technical Contributor
Offline
User avatar

Age: 34

Posts: 3714

Joined: 27th Sep 2006

Gallery: 20 images

Ride: ED Falcon

Power: 133 rwkw

Location: Leeton
NSW, Australia

You need to buy this manual...

http://www.fordfalconrepairmanuals.com. ... eries2.php

I did... Its 20USD... It is the genuine Ford item... I have had it beside the paper copy and it is word for word identical except is complete with hyperlinks for quick and easy navigation...

I used it for putting the AU VCT into my ED... Not sure what you're doing? I fitted full AU wiring harnesses so it is an AU inside an ED shell... Uses AU immobilisation and remotes with OBDII diagnostics and comms... Works good and most was plug and play with the exception of changing the plugs... So most of it I didn't have to worry about too much... Biggest job was the dash loom...

See my build thread...

Cheers,
Tim

 

_________________

93 Red ED 5spd Manual Build Thread

Performance: Complete AUII VCT Wiring & Power Train, Pacey Headers, 2.5" Exhaust, Exedy Clutch, DBA Rotors
Visuals: FG XR Wheel, XR Front, 17's, BA 5 Spd Shifter, BA Ghia Window Switches, NL Cluster
Tunes: 8" Pioneer Sub, JBL Speakers, Clarion Double DIN Headunit

Top
 Profile  
 
 
 Post subject: Re: XF - AU VCT conversion, engine wiring diagram needed please
Posted: Sun Apr 20, 2014 7:35 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3925

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

xfute4.0 wrote:
Gotten a lot of use out of the Gregory's one for the xf over the years, the numbers and letters on the wiring diagrams are hard to read though, have to be enlarged, and the old SP (scientific publications) ones are also good,

Attachment:
2014-04-20 15.20.57.jpg

Attachment:
2014-04-20 15.20.18.jpg



the scientific one i threw away as useless as the gregorys compared to the factory manuals i was using
Top
 Profile  
 
 
 Post subject: Re: XF - AU VCT conversion, engine wiring diagram needed please
Posted: Mon Apr 21, 2014 9:01 pm 
Fordmods Newbie
Offline

Age: 56

Posts: 16

Joined: 24th Sep 2013

Ride: XF Falcon ute

Location: shepparton
VIC, Australia

Thanks for the advice about the AU manual Tim, nice ride btw. I'm using engine, trans, engine harness and ecu from the same model (supposedly) Au with J3 chip to make it run stand alone. Its got an xg fuel tank and xg engine mounts and fabricated transmission mounts. I have mostly worked out the wiring and added relays for ecu, fuel pump and starter and it should work.
I am currently working on the HEGO sensor wiring. The sensor is in the exhaust manifold but I can't see any plug for it anywhere in the harness so I have to hard wire it when I work out the wire colors. I am also not sure about getting the temp gauge to work and the engine cooling fans, Its a work in progress. I got some info from another forum which turned out to be not workable for my car so wasted a bit of time there, but you get that.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Mar 30, 2024 1:41 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names