Fordmods Logo

'08 FG xt ICC/BEM problems QLD 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: '08 FG xt ICC/BEM problems QLD
Posted: Fri Apr 25, 2014 9:15 am 
Oompa Loompa
Offline

Age: 64

Posts: 26

Joined: 6th Jun 2005

Location: Brisbane
QLD, Australia

I have just bought an 08 FG xt dedicated LPG car. I have discovered it has some problems with the electrics. I was wondering if there was somebody in the Brisbane area that had a scan tool that they could plug in and tell me what I need to replace please. When I picked the car up and got it home both of the battery terminals were very loose so it may have spiked a lot of the electrics in the car.

Everything seems to work but sometimes is shows a code error for the radio and when you turn the cruise control on sometimes the dash indicator just flashes, also the outside temp is always very wrong.

I know if I take it to my local Ford dealer they would be able to tell me what the problems are if I pay them for the two hours labour they say it will take to run the diagnostics on the car

Michael

 

_________________

KINETIK FG mark 2 XR6 TURBO

Top
 Profile  
 
 
 Post subject: Re: '08 FG xt ICC/BEM problems QLD
Posted: Fri Apr 25, 2014 6:33 pm 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

CRUISE NEEDS TO SEE BRAKE PEDAL OPERATION TO OPERATE, MAKE SURE ALL STOPLIGHT GLOBES ARE WORKING AND CORRECT ONES OR CRUISE WONT WORK - COMMON FAULT WAS FOR IMPOSSIBLE READING FROM OUTSIDE TEMP - REQUIRES NEW SENSOR IN LEFT HAND MIRROR (sensor only not mirror) - RADIO MAY REQUIRE REINSTALLING, CODE CLEARING VIA FORD SCAN TOOL - VEHICLE IS PRONE TO FAULTS IE. CODES ETC. IF BATTERY VOLTAGE IS SUSSPECT.
Top
 Profile  
 
 
 Post subject: Re: '08 FG xt ICC/BEM problems QLD
Posted: Sat Apr 26, 2014 4:35 pm 
Oompa Loompa
Offline

Age: 64

Posts: 26

Joined: 6th Jun 2005

Location: Brisbane
QLD, Australia

When you turn the cruise control on instead of the indicator telling you the cruise control is being on solid at times this one flickers and you are unable to set the speed, all brake lights are working.

It had been fitted with a new battery before I bought it and both of the terminals had been left loose.

 

_________________

KINETIK FG mark 2 XR6 TURBO

Top
 Profile  
 
 
 Post subject: Re: '08 FG xt ICC/BEM problems QLD
Posted: Sun Apr 27, 2014 6:55 pm 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

check how much local auto elect or similar will charge to scan write down codes and clear if any as a starting point
Top
 Profile  
 
 
 Post subject: Re: '08 FG xt ICC/BEM problems QLD
Posted: Wed Apr 30, 2014 1:43 am 
Getting Side Ways
Offline

Age: 44

Posts: 1275

Joined: 30th Sep 2007

Ride: g6e 2009

Location: hiding in the bushes
WA, Australia

check the condition and specs of the battery first. the fg falcon suffers lots of electrical problems if the battery is not up to spec or if its a bit dodgy. i would suggest installing a new battery that meets or exceeds fords specs for the car, check the wiring to the terminals, and check for a good earth connection. then see if the problems persist.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Apr 19, 2024 7:37 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names