Fordmods Logo

Building a NL Fairlane A drag car 

 

Page 12 of 13 [ 189 posts ] Go to page Previous  1 ... 9, 10, 11, 12, 13  Next

 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Thu May 29, 2014 3:20 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

Street meet on Friday night weather permitting.
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Sat May 31, 2014 12:19 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

I wasnt allowed to drive as you have to be 17 but dad drove. We only got two passes out of her before it blew a belt and the crank pulley slid forward.

Link to 1st run
https://www.flickr.com/photos/122310286 ... 308553944/
Link to 2nd run
https://www.flickr.com/photos/122310286 ... otostream/
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Sat May 31, 2014 1:00 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

do they weigh the car at the track? so what mods have you done all up? maybe make a complete list, because i cant be bothered going through previous pages :lol:

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Sat May 31, 2014 1:08 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

It didn't get weighed.
List of mods:
Removed all interior
Cut doors up
Air intake through Light
Extractors
Line Lock

All i can think of now
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Sat May 31, 2014 1:18 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

should look into diff gears, that will get the weight moving easier

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Sat May 31, 2014 1:25 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

What gear ratio would you recommend?
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Sat May 31, 2014 1:31 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

depends what the future mods are but 4.11 diff gears would really get it moving, when i was researching i read somewhere that decent diff gears should knock about half a second off your times

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Sat May 31, 2014 1:55 pm 
Stock as a Rock
Offline

Age: 34

Posts: 199

Joined: 27th Jun 2008

Gallery: 9 images

Ride: EF 2 Fairmont. AU 5 Litre ute

Location: Berwick
VIC, Australia

Thats not to bad. I did a 16.2@84mph I think in my ef fairmont and all it has is a exhaust. So a fair it og weight has come out of yours
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Sat May 31, 2014 2:17 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

What gear ratio would you recommend?
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Sat May 31, 2014 2:19 pm 
Stock as a Rock
Offline

Age: 34

Posts: 199

Joined: 27th Jun 2008

Gallery: 9 images

Ride: EF 2 Fairmont. AU 5 Litre ute

Location: Berwick
VIC, Australia

I'd say 4:11's aswel. But that depends on future mods. You would want to car crossing the line in top gear
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Sat May 31, 2014 2:30 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

4.11 it is :D
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Sat May 31, 2014 9:55 pm 
Fordmods Newbie
Offline

Age: 39

Posts: 14

Joined: 25th Nov 2013

Ride: EF Falcon

Location: Sydney
NSW, Australia

4.11 25inch tyres 104mph@5750rpm.
26inch tyre 108mph@5750rpm.

You can run into the 12's with that mph but if you want to go faster 3.89 might be better.
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Fri Dec 19, 2014 1:11 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

Its been a while since ive done a bit of work on her, but im back! Ive got 4.11s going in and was wondering what are the biggest slicks that will fit under it?
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Dec 29, 2014 1:34 pm 
Fordmods Newbie
Offline

Age: 39

Posts: 14

Joined: 25th Nov 2013

Ride: EF Falcon

Location: Sydney
NSW, Australia

26x8.5x15 works well on mine.
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Tue Dec 30, 2014 9:02 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

Thanks mate will give them a try
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 12 of 13  [ 189 posts ]  Go to page Previous  1 ... 9, 10, 11, 12, 13  Next

Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 5:42 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names