Fordmods Logo

Au wagon power windows 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: Au wagon power windows
Posted: Tue Jul 22, 2014 2:07 pm 
Fordmods Newbie
Offline

Age: 27

Posts: 3

Joined: 30th Dec 2012

Ride: Ef falcon

Location: Muswellbrook
NSW, Australia

I recently changed the body loom in my AU wagon so that I could run power windows in the rear. I already had power windows in the front and now that I have changed the body loom and all the door looms everything works fine but the power windows. Are the looms series sensitive? I took the loom out of my series 3 futura wagon and put it in my series 1 forte wagon. Help please!!
Top
 Profile  
 
 
 Post subject: Re: Au wagon power windows
Posted: Tue Jul 22, 2014 4:54 pm 
Fordmods Junkie
Online
User avatar

Posts: 3925

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

possibly differant coz AU1 is smartlock & AU3 is smartshield.... may have differant connectors? did you make sure of what you were connecting to? ie check wiring/connectors are same
Top
 Profile  
 
 
 Post subject: Re: Au wagon power windows
Posted: Tue Jul 22, 2014 5:18 pm 
Fordmods Junkie
Online
User avatar

Posts: 3925

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

Top
 Profile  
 
 
 Post subject: Re: Au wagon power windows
Posted: Wed Jul 23, 2014 1:09 am 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

connected in parallel -have you changed drivers window switch - is rear window isolation switch on -all switches to each individual circuit need to be connected in order to operate window

post pic of ignition key to check if smartlock or smartshield

check circuit at rear window
brown from lights ??
check for power on grey/yellow wire
earth on remaining two wires into switch

other two wires red/yellow and blue yellow I think go to motor and switch power and earth depending on up or down
Top
 Profile  
 
 
 Post subject: Re: Au wagon power windows
Posted: Wed Jul 23, 2014 1:42 am 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

do front windows work?
- check window relay and fuse
did you change BEM module ?
Top
 Profile  
 
 
 Post subject: Re: Au wagon power windows
Posted: Wed Jul 23, 2014 10:26 am 
Fordmods Newbie
Offline

Age: 27

Posts: 3

Joined: 30th Dec 2012

Ride: Ef falcon

Location: Muswellbrook
NSW, Australia

Front windows don't work, have changed the front power window switch and all switches are plugged in but still nothing. The car doesn't have a smartlock button on the dash near the wiper stalk. Changed the computer under the dash above left knee and the wipers went constantly and car wouldn't turn over.
Top
 Profile  
 
 
 Post subject: Re: Au wagon power windows
Posted: Wed Jul 23, 2014 5:08 pm 
Fordmods Junkie
Online
User avatar

Posts: 3925

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

on the pwr window relay can you work out which has pwr/earth applied to it so it operates/energises?

reason i ask .... if you can work out which is the earth apply an independant earth to the relay to see if it operates .... if you can & it does .. you should be able to get the windows to at least let you know eitha way - works or don't work


i think ...... lol :roll: - looking at the pic i supplied it looks like the body comp controls the earth side of the windows relay


i fitted BA window switches to an AU1 four window setup . . . . . didn't work, presume switches differant?
Top
 Profile  
 
 
 Post subject: Re: Au wagon power windows
Posted: Thu Jul 24, 2014 12:01 am 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

remove window relay - check markings on relay-bridge terminals in socket that match with relay terminals 30 & 87 and see if windows work -

if not check for power at main switch grey/yellow wire and earth at black wire

if windows work when bridged check for power at terminals 30 & 86 in socket and earth at terminal 85...

earth to terminal 85 comes from BEM module which requires correct pin location between harness and BEM module....

was bem wiring replaced ?
is vehicle prior to 6/99 ?
Top
 Profile  
 
 
 Post subject: Re: Au wagon power windows
Posted: Tue Aug 26, 2014 11:22 am 
Fordmods Newbie
Offline

Age: 27

Posts: 3

Joined: 30th Dec 2012

Ride: Ef falcon

Location: Muswellbrook
NSW, Australia

Thanks for your help guys. Managed to fix the problem, it was the no 2 radio fuse and a disconnected wire. New problem has now presented itself though. Every time I open the doors the actuators cycle and when the doors are closed the car won't lock. The doors cycle and the horn goes off. Checked all the fuses. HELP PLEASE. Also when I push the economy/power button the door locks cycle and economy stays on.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 10:03 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names