|
| ahow6235 |
|
||
|
G'day all,
What crank are people using in their turbo ef engine? So far I'm running stock ef engine (5speed with hd clutch) with mach 2 turbo kit dyno tuned at 287.6 hp at the wheels. Now I'm hungry for more and was wondering if people stick with the same ef crank when rebuilding with spool?? Cheers. |
||
| Top | |
||
| EBXR8380 |
|
|||
|
The std crank will take 1000 rwhp so why the issue ?
Spool are the cheap but ok rods .. Wouldn't use them on all out 1000+ h.p race engine ..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| ahow6235 |
|
||
|
Cheers that answers my question thanks. I was just in sure how much the standard crank could handle.
|
||
| Top | |
||
| EBXR8380 |
|
|||
|
Could try nitriding the crank ?
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| 67RCE |
|
||
|
Stock crank will take 885rwkw. Fritzz broke the SOHC power record, but that was with an engine built in a very similar fashion RBKILA.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 6 guests |
