Fordmods Logo

wheel bearings 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: wheel bearings
Posted: Sat Feb 20, 2016 5:06 pm 
Stock as a Rock
Offline

Age: 36

Posts: 179

Joined: 6th Aug 2014

Ride: ford

Location: yorke peninsula
SA, Australia

hi

have a ef fairmont that makes a growl or hum noise after about 40 km/hr and it gets louder as the speed increases and is comming from the front.

the noise changes a little when you turn the wheel left or right cant remember.

and jacked up and theres a small play at 12 & 6 position and think there was a unusual small noise on one side but couldnt spin wheel by hand fast enough.

anyone know if its wheel bearings and has anyone had same problem and how do you know if wheel bearings are going
Top
 Profile  
 
 
 Post subject: Re: wheel bearings
Posted: Sat Feb 20, 2016 8:28 pm 
Technical Contributor
Offline

Age: 66

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Sounds like wheel bearings. Check for play in the front wheel.
Top
 Profile  
 
 
 Post subject: Re: wheel bearings
Posted: Sat Feb 20, 2016 8:59 pm 
Stock as a Rock
Offline

Age: 36

Posts: 179

Joined: 6th Aug 2014

Ride: ford

Location: yorke peninsula
SA, Australia

Jacked up and grabbed wheel at 12 & 6 pos and both sides seem to have a few mm play and one side seemed to grind but couldn't spin wheel fast enough to see.

Can't be power steer water pumps or alternator or idler pulleys or any engine accs as it's quiet at idle and reving standing still
Top
 Profile  
 
 
 Post subject: Re: wheel bearings
Posted: Sun Feb 21, 2016 6:52 am 
Technical Contributor
Offline

Age: 66

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Jack the car up, remove the front wheels, take off the caliper and then check the play with the disc.

You should be able to spin the disc easily and hear any grinding clearly.

I still think your bearings are stuffed.

Also while you have your wheels off you can pop the grease cap and check the grease in the bearings.
Top
 Profile  
 
 
 Post subject: Re: wheel bearings
Posted: Mon Feb 22, 2016 8:11 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

Does sound like a wheel bearing issue. If it hasn't been replaced before, chances are they are gone by now!

Not a hard of a job to do, but can get messy with the bearing grease.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 48 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Apr 25, 2024 1:08 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names