Fordmods Logo

Malwood pin kit or Factory pedal box? 

 

Page 3 of 3 [ 42 posts ] Go to page Previous  1, 2, 3

 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Wed Jun 05, 2013 12:22 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 849

Joined: 3rd Jan 2011

Gallery: 1 images

Ride: Subaru Liberty RX Wagon MY03

Location: North Richmond
NSW, Australia

GeZza200 wrote:
Haha the original pedal box isn't the "best" its s**t, that's why everyone one you see with a heavier clutch the box is shagged. Use the Malwood pin or reinforce the original one.


That's why I welded some 25 mm angle over the back of the pin. That's why there is white paint all over the inside.

The original and the best is an advertising tagline for some product I don't remember.

 

_________________

Current ride: MY03 Liberty RX Wagon
EBII S-XR6, Now 5 speed. Moved on to greener pastures...

Top
 Profile  
 
 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Wed Jun 05, 2013 1:18 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 1442

Joined: 26th Apr 2006

Gallery: 6 images

Ride: 97 EL XR6

Power: 162 rwkw

Location: liverpool
NSW, Australia

after you reinforce your firewall, the new weak point becomes the pedal box. so make sure you reinforce both at the same time.

after that then all you need to do is replace stretched clutch cables :lol:

 

_________________

07 BF MKII XR6T
310rwkw @ 13psi - Tuned By CMS

Top
 Profile  
 
 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Wed Jun 05, 2013 1:27 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3925

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

FAST-XR wrote:
after you reinforce your firewall, the new weak point becomes the pedal box. so make sure you reinforce both at the same time.

after that then all you need to do is replace stretched clutch cables :lol:



+1
Top
 Profile  
 
 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Wed Jun 05, 2013 1:40 pm 
Getting Side Ways
Offline

Age: 35

Posts: 2563

Joined: 19th Feb 2007

Gallery: 21 images

Ride: 98 EL Futura

Power: 199 rwkw

Location: Lilydale
VIC, Australia

or you can get this http://www.malwoodauto.com.au/index.php ... hydraulics and be done with it.

 

_________________

EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come

Top
 Profile  
 
 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Wed Jun 05, 2013 7:33 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 3379

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

in my EB the pedal box had been done in the past. and I never did the firewall

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Wed Jun 05, 2013 7:43 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3925

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

89.SVO wrote:
in my EB the pedal box had been done in the past. and I never did the firewall



do it in the EA
Top
 Profile  
 
 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Wed Jun 05, 2013 7:48 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 3379

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

meh. I have a spare pedal box anyway, that is cracked. I'll fix it up

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Wed Jun 05, 2013 8:06 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3925

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

i've "fixed" a stuffed EA pedal box ..... i have an EA AND EB pedal box here




when i swap boxes ... i'll reinforce the clutch pin area then as i did yrs ago :twisted:

ohhh PLUS add sum plate ta the firewll so what happened to me X's don't happen ta me :wink:
Top
 Profile  
 
 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Thu Jun 06, 2013 9:00 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 580

Joined: 9th Sep 2009

Ride: EF Falcon GLi

Location: ADELAIDE
SA, Australia

Them pictures were very good, how long does it take use?

 

_________________

Now, I've got a message for all the other drivers out there. If you smell a delicious, crispy smell after the race, it's not your tailpipe. It's just a little of Shake...and Bake!
SHAKE AND BAKE

Top
 Profile  
 
 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Mon Jun 17, 2013 8:45 pm 
Oompa Loompa
Offline

Age: 38

Posts: 21

Joined: 27th Feb 2012

Ride: 5.0L eb fairmont ghia, xe ute

Location: gold coast
QLD, Australia

you can remove and install the pedal box without taking the entire dash out i have done it before you still have to remove steering column,handbrake then remove the dash cluster then behind that is the air duct which you can pop that section out then you can get to the top three bolts that hold the pedal box
Top
 Profile  
 
 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Tue Jun 18, 2013 7:56 am 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 3379

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

it's not like the dash is hard to pull out.
But I used the origina; pedal box. Come out of a factory manual EA1 Fairmont Ghia.
And went into my EA1 Fairmont Ghia. So the pedal box had the vacuum port and clutch switch so the cruise works all correctly. Cancels when the clutch or brake a pressed

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: Malwood pin kit or Factory pedal box?
Posted: Wed Mar 16, 2016 9:56 pm 
Fordmods Newbie
Offline

Age: 38

Posts: 17

Joined: 19th Apr 2013

Ride: ford NL

Location: gisbourne
VIC, Australia

i have one of these mal wood pins best thing ever so much better then the stantard one, i have a VERY heavy clutch not a problem driving in melb any where i have had my one for years now BEAT THING EVER.. you wont be disappointed ever the clutch will let u down the pin will stand the test of time...
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 3 of 3  [ 42 posts ]  Go to page Previous  1, 2, 3

Who is online

Users browsing this forum: Google Adsense [Bot] and 39 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 6:50 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names