|
| jumpingjak |
|
||
|
I tryed to put up a video of the car running but photo bucket want upload it. It sounds like i droped a v8 in it
|
||
| Top | |
||
| jumpingjak |
|
||
|
I figured out the fuel pump relay has 2parts to it. The bit you unplug which is a normal relay and the bit that stays attached to the loom is like a timed relay that runs for about 3seconds. for the life of me i cant get that timed relay to stay activated when the engine runs. Im getting the negative voltage show up on the bf pcm wire when the engine start and as soon as i hook the other side up to a poss voltage you here the relay click but 3seconds later it shuts off.
|
||
| Top | |
||
| jumpingjak |
|
||
|
g fkn g guys i figured out the fuel pump relay. i was wrong there is not 2parts the the fuel relay, and the info given to plug that wire into the pumps earth relay was not right eather.. It was the relay next to the fuel pump relay that shuts the fuel off after 3seconds, and guess what.... As soon as i added the bf pcm fuel wire to the earth of the ecu relay my fuel pump now primes it self and shuts off and it also kicks back in when the engine starts so im done
 ... convertion complete pritty much completed .. Just need to do my washer bottle, air con lines and put a thermo fan in.
|
||
| Top | |
||
| Mad2 |
|
|||
|
jumpingjak wrote:  My vacum hoses. I hooked up a t peice in there to connect it to the green and black hoses to change the rent flaps. the two vacuum hoses coming from the heater/aircon are for the inlet manifold & heater tap. whats the rent flap?? |
|||
| Top | |
|||
| jumpingjak |
|
||
|
lol sorry man, i ment vent flaps. to change were you want the air to flow inside the car.. I do need to fix it up alittle bit as its letting to much air thru and you can here it in the car... I also have to hook up the perge solinoide.
|
||
| Top | |
||
| jumpingjak |
|
||
|
haha now you mention it, i kinda forgot about the heater tap
 i spoze it would be a good idea to hook that in aswell ay 
|
||
| Top | |
||
| Mad2 |
|
|||
|
jumpingjak wrote: haha now you mention it, i kinda forgot about the heater tap i spoze it would be a good idea to hook that in aswell ay yep lol |
|||
| Top | |
|||
| jumpingjak |
|
||
|
do you guys know were i hook the perge solinoide upto? I dont need the thermo fan to go for a little drive around the block ay? coz it about that time
, all i realy need is a fan to go for a good test drive. I still need to make sure my speedo works, i have not cheched that out yet but it should work ok.
|
||
| Top | |
||
| Mad2 |
|
|||
|
jumpingjak wrote: do you guys know were i hook the perge solinoide upto? I dont need the thermo fan to go for a little drive around the block ay? coz it about that time , all i realy need is a fan to go for a good test drive. I still need to make sure my speedo works, i have not cheched that out yet but it should work ok.hooks up to inlet just below the throttlebody from memory 
|
|||
| Top | |
|||
| jumpingjak |
|
||
|
yes you were right man it hooked upto the inlet manifold.. I got a bf thermo fan today and put it in, it works fine
I just need to make up sum small brackets so i can bolt it on, eny tips on that would be nice  . I was going to make sum small brakets for the left side so a can use the 2bolt holes were the gearbox lines hooked into and the other side for the top i was going to make a braket that went from the bolt that holds the radiator on the the mounting hole on the thermo fan. and the bottom on that side im not to sure yet..
|
||
| Top | |
||
| Mad2 |
|
|||
|
jumpingjak wrote: yes you were right man it hooked upto the inlet manifold.. I got a bf thermo fan today and put it in, it works fine I just need to make up sum small brackets so i can bolt it on, eny tips on that would be nice . I was going to make sum small brakets for the left side so a can use the 2bolt holes were the gearbox lines hooked into and the other side for the top i was going to make a braket that went from the bolt that holds the radiator on the the mounting hole on the thermo fan. and the bottom on that side im not to sure yet..lol .. good to see i get somethin right now & then  .... sorry canna help ya with the brackets mate 
|
|||
| Top | |
|||
| jumpingjak |
|
||
|
I think my bracket idea will work ok
Im going to bunnings today to get some brakets and bolts. Im also going to use the bf washer bottle. hopefully today or tomorrow will be my test drive day
|
||
| Top | |
||
| jumpingjak |
|
||
|
Got the washer bottle and thermo fan mounted in the car.. I have sum pictures i just need to add them to photo bucket. I went for a test drive yesterday my speedo did not work and the car felt like a 4cylinder, after going over my books i just put the pcm vss to the wrong wire in the eb loom, not to sure why the car ran so crappy tho
|
||
| Top | |
||
| jumpingjak |
|
||
|
 Thats all i had to cut out the blinker hole to make the washer bottle fit |
||
| Top | |
||
| jumpingjak |
|
||
|
 My brakerst on the bottle.. the long bracker is abit to long have to cut out 1or2 peices |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 15 guests |
