Fordmods Logo

Tuning your Falcon with a T.I. Performance J3 Chip 

 

Page 98 of 98 [ 1465 posts ] Go to page Previous  1 ... 94, 95, 96, 97, 98

 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Mon Aug 22, 2016 11:13 pm 
Getting Side Ways
Offline
User avatar

Posts: 1139

Joined: 27th Feb 2005

Ride: Supercharged EF Fairmont

Location: T.I. Performance HQ
VIC, Australia

The bins are stock. Has the car had enough key cycles with the chip in to start learning trims?

 

_________________

T.I. Performance - Performance Tuning for your Ford. J3 Chips, DIY Tuning Kits, Wideband O2 Controllers and much more!

Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Fri Sep 02, 2016 6:30 pm 
Getting Side Ways
Offline
User avatar

Posts: 3363

Joined: 27th Dec 2004

Gallery: 4 images

Ride: MCMXCV Falcon

Location: G town
VIC, Australia

hi galapogos ..

i have been busy with other work but have had some success getting timing changes ..

i maxed out the mbt tables (with 55s) and bumped the bdln knocks up heaps .. seems to give a decent result .. especially down the revs .. i also swapped around the tables so i had 55s in the bdln knock tables and got a slightly less consistant result ..(pulls timing more widely it seems) ...

i also modded the "#3 #4 dont use tables" with no negative results .. i did this out of desperation and at the same time as other other changes, so im not sure what impact it really had but things started working at that stage. .

but im still not getting any LTFT or lean cruise .. economy is not very good ..

 

_________________

Image

Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Fri Sep 02, 2016 7:37 pm 
Getting Side Ways
Offline
User avatar

Posts: 1139

Joined: 27th Feb 2005

Ride: Supercharged EF Fairmont

Location: T.I. Performance HQ
VIC, Australia

Try from a stock bin again and use the latest def on the site v6 - Kendall worked out an issue with the labeling on the timing tables.

We're you getting trims with no chip?

Cheers,
Jason

 

_________________

T.I. Performance - Performance Tuning for your Ford. J3 Chips, DIY Tuning Kits, Wideband O2 Controllers and much more!

Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Fri Sep 02, 2016 8:09 pm 
Smokin em up
Offline
User avatar

Age: 26

Posts: 236

Joined: 4th Jan 2009

Ride: ED XR6, AUII XR8

Location: Melbourne
VIC, Australia

How do you know there is no lean cruise? I monitored with a wideband... noticed with an 82deg thermostat it didn't engage lean cruise, so the min temp must be quite high (EL ECU).

On another note galapogos01, does the problem with the AC being permanently on still affect AU's?

 

_________________

ED XR6, LeMans Red, 5-Speed
AUII XR8, Silhouette, 5-Speed

Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Fri Sep 02, 2016 8:21 pm 
Getting Side Ways
Offline

Age: 33

Posts: 1109

Joined: 27th Dec 2011

Gallery: 6 images

Ride: ef falcon futura

Power: 154 rwkw

Location: Koo Wee Rup
VIC, Australia

shyun wrote:
How do you know there is no lean cruise? I monitored with a wideband... noticed with an 82deg thermostat it didn't engage lean cruise, so the min temp must be quite high (EL ECU).


Im assuming itll show in the scantool. Did you have your O2 connected when you tried or just the wideband?

 

_________________

ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics.

Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Fri Sep 02, 2016 8:40 pm 
Smokin em up
Offline
User avatar

Age: 26

Posts: 236

Joined: 4th Jan 2009

Ride: ED XR6, AUII XR8

Location: Melbourne
VIC, Australia

ranga83 wrote:
shyun wrote:
How do you know there is no lean cruise? I monitored with a wideband... noticed with an 82deg thermostat it didn't engage lean cruise, so the min temp must be quite high (EL ECU).


Im assuming itll show in the scantool. Did you have your O2 connected when you tried or just the wideband?


True, if you can monitor LAMBSE or o2 Voltage (It should be 0V) in forscan.

Another thing- if you have a problem with the 02 sensor it wont cycle enough times to engage lean cruise, as you need a certain amount of cycles to enable it.

 

_________________

ED XR6, LeMans Red, 5-Speed
AUII XR8, Silhouette, 5-Speed

Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Sat Sep 03, 2016 6:32 pm 
Getting Side Ways
Offline
User avatar

Posts: 3363

Joined: 27th Dec 2004

Gallery: 4 images

Ride: MCMXCV Falcon

Location: G town
VIC, Australia

guys ...

i was running forscan looking at ob2 data on the std ecu for a while (with no j3 fitted) .. i have a wideband bung welded in separately to the the std o2 .. wide band was confirming the lean cruise ..

forscan reports closed/open loop and stft/ltft .. great software (major advantage over eseries' total lack of live data) ..

as for thermostat, it has not been changed and i def did see in lean cruise on the VCT ecu (ive also got a std non vct ecu i have been using but didnt monitor it much previously and am now running it with j3 - i dont see why it wouldnt perform the same) .. but interestingly the vct did not enter lean cruise all the time (or not as often as i expected) and yes the temp is on the low side ... i have some logs with the ECT and CHT but off the top of my head im not sure of temps it was running at (seem to remember it being around 82ish) ..

also i have the permanently on AC issue (compressor cycling and left fan on all the time) .. looking at modding the main on/off switch and relay circuit to get around it ..

 

_________________

Image

Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Mon Dec 12, 2016 7:23 pm 
Getting Side Ways
Offline
User avatar

Posts: 1139

Joined: 27th Feb 2005

Ride: Supercharged EF Fairmont

Location: T.I. Performance HQ
VIC, Australia

Image

At T.I. Performance we're counting down the 12 days of Christmas with amazing deals! With up to 12% off on a huge range of products, you're bound to find some stocking stuffers! Sale ends Christmas Eve so get clicking!

 

_________________

T.I. Performance - Performance Tuning for your Ford. J3 Chips, DIY Tuning Kits, Wideband O2 Controllers and much more!

Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Thu Dec 15, 2016 7:26 pm 
Smokin em up
Offline

Posts: 267

Joined: 5th Dec 2009

Location: Perth
WA, Australia

shyun wrote:
How do you know there is no lean cruise? I monitored with a wideband... noticed with an 82deg thermostat it didn't engage lean cruise, so the min temp must be quite high (EL ECU).

On another note galapogos01, does the problem with the AC being permanently on still affect AU's?


I messaged ti perf about my s3 manual au xr8 and was told a j3 would make the thermos/ac run constantly,was only a few weeks ago,if not I would have one of their chips in already:)
Sorry to jump in there.
Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Sun Dec 25, 2016 12:32 am 
Stock as a Rock
Offline

Age: 29

Posts: 100

Joined: 19th Jan 2016

Ride: G6e

Location: Adelaide
SA, Australia

silly question didn't want to pester Jason via PM some more

But what table has the best direct result in AFR ratio control

fuel OL stabilized table , Fuel base table , or VE table ?

Or is the VE table more related towards air drawn in but then that would obviously have a effect on fuel

Just wanting to know which tables to edit i am going to enter a slightly richer AFR target to get started with for a boost tune
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 98 of 98  [ 1465 posts ]  Go to page Previous  1 ... 94, 95, 96, 97, 98

Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Jan 18, 2017 8:15 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names