Fordmods Logo

Tuning your Falcon with a T.I. Performance J3 Chip 

 

Page 99 of 99 [ 1476 posts ] Go to page Previous  1 ... 95, 96, 97, 98, 99

 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Thu Nov 09, 2017 4:26 pm 
Getting Side Ways
Offline
User avatar

Posts: 1141

Joined: 27th Feb 2005

Ride: Supercharged EF Fairmont

Location: T.I. Performance HQ
VIC, Australia

I believe Kendall has been making some progress in this area...
Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Thu Nov 09, 2017 4:33 pm 
Getting Side Ways
Offline

Posts: 839

Joined: 1st Apr 2005

Gallery: 4 images

Ride: EF XR6 Wagon, AU2 XR6 VCT

Power: 148 rwkw

Location: Auckland
New Zealand

That would be great! Even if I could find out where to look in the hex and the format of the data, I could probably figure it out from there. Thanks for your help.

 

_________________

95 EF XR6 wagon, 17" FTRs, DBA, QFM, KYB/Koni, AU block, ported EF head, SS Inductions, Territory intake, MLS gasket, milled, Franklin RH24B cam, Coby headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip

Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Tue Nov 14, 2017 8:29 pm 
Getting Side Ways
Offline

Age: 35

Posts: 1112

Joined: 27th Dec 2011

Gallery: 6 images

Ride: ef falcon futura

Power: 154 rwkw

Location: Koo Wee Rup
VIC, Australia

Yeah i have found a few scalars and functions that seem to control the fans on ef. Unsure of actual conversions just yet so its not ready to be released but it shouldnt be too long .

 

_________________

ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics.

Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Tue Nov 14, 2017 9:44 pm 
Getting Side Ways
Offline

Posts: 839

Joined: 1st Apr 2005

Gallery: 4 images

Ride: EF XR6 Wagon, AU2 XR6 VCT

Power: 148 rwkw

Location: Auckland
New Zealand

That would be great. Thanks for the hard work sorting this stuff out.

 

_________________

95 EF XR6 wagon, 17" FTRs, DBA, QFM, KYB/Koni, AU block, ported EF head, SS Inductions, Territory intake, MLS gasket, milled, Franklin RH24B cam, Coby headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip

Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Thu Jun 07, 2018 3:08 pm 
Fordmods Newbie
Offline

Posts: 2

Joined: 25th Jan 2017

Ride: NF Fairlane

Location: maryborough
QLD, Australia

Just. A j3 chip Question. Can you get a tune for HP. Play and daily drive and a 2nd tune for torque when towing. And would that work with a mid range cam is stage 3 crow 2222549. Would like to go this way and I'm currently rebuilding my motor but worried it will wreck towing driveability. Thanks
Top
 Profile  
 
 
 Post subject: Re: Tuning your Falcon with a T.I. Performance J3 Chip
Posted: Thu Jun 07, 2018 10:03 pm 
Getting Side Ways
Offline
User avatar

Posts: 1141

Joined: 27th Feb 2005

Ride: Supercharged EF Fairmont

Location: T.I. Performance HQ
VIC, Australia

You should not need two tunes for that application; a Stage 3 pre-tuned chip should be fine for both as they are different RPM and load points. You only really need a separate tune when variables change, ie. different fuels, boost levels, NOS etc.

Cheers,
Jason
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 99 of 99  [ 1476 posts ]  Go to page Previous  1 ... 95, 96, 97, 98, 99

Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Jun 23, 2018 11:42 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names