Hi All,
Recently, due to faulty wiring, I was forced to replace the combination stalk on my BF MK2 ES Falcon.
I purchased the new stalk from a breakers yard but it wasn't until after i'd fitted it that i realised there was an extra twisting dial switch on the end of the wiper stalk which is supposed to control a rear wiper and jet which my vehicle does not have.
The front wipers, including the intermittent, work fine however the front jets do not work now and i cannot hear the washer motor whiring away either.
My question is should the wiring be the same in the combination switch and the washer motor has just blown, or is the wiring different and should i buy the correct combo switch

Thanks in advance

Wiring i would assume to be the same just the extras for the wagon stuff in the back, was the washer pump working with the old stalk?

Might be worth unhooking the new stalk under the dash hooking the old one up and see if the pump works then, might be a brummy switch in the (new) stalk you got