|
| Tommo52 |
|
|||
|
Mad2 wrote: links no longer work for the updated pics & all i could get was = 503 Service Unavailable No server is available to handle this request. I had turned the server off that hosts all my images, it's back up now.
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
Tommo52 wrote: Mad2 wrote: links no longer work for the updated pics & all i could get was = 503 Service Unavailable No server is available to handle this request. I had turned the server off that hosts all my images, it's back up now. ahhh .... that explains that   how's it going with your's 
|
|||
| Top | |
|||
| Tommo52 |
|
|||
|
Mad2 wrote: how's it going with your's Pretty slow these days, haven't done much more but fit the ABS, PCM and route a heap of loom within the wheel arches like the factory BA locations. Work has just been so busy, especially during the end of Term 4 plus with moving out of my local town back to my parents and then back into town the EB has just sat on the farm. Late January i'm putting a Barra into a 80 series Landcruiser, replacing the 3F donk. Looking forward to that conversion.
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| Tommo52 |
|
|||
|
Hi all, its been a while. thought i'd post some pictures of what I've been up to lately.
Fitting a 182 Barra to 80 Series Land Cruiser. Engine bay with and without original 3F motor.   Gearbox cross member modified to shift Gearbox forward 3cm  Gear shifter in 1st after gearbox moved  Barra to Toyota FJ80 5 speed  Barra engine in and temp bolted to Gearbox     PCM mounted 
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
||||
| Top | |
|||
| Tommo52 |
|
|||
|
Mad2 wrote: :shock:  It's so close to being complete. Just have to finish engine mounts, find an inline fuel pump that will match the BA XR6 spec and finish the engine loom then it's off to the local shops to get AC and PS lines, new 2 1/2" exhaust and an intake pipe that will fit under the bonnet.
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Thats so cool,should have some good torque now.
Cheers Johnny.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Tommo52 |
|
|||
|
johnnyeHCF wrote: Thats so cool,should have some good torque now. Thanks Johnnye. My hopes are that it will out perform the 1FE-FZ equipped 100 series Land Cruiser, the Barra has only 8 less foot pound of torque with higher fwkw and 500cc less internal volume. With extractors, exhaust and a bigger intake i'm guessing better economy and powaa! 
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| Tommo52 |
|
|||
|
Few more pictures of the land cruiser progress
        
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
coming along goood!
|
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Man thats going to be a whole lot of fun
 Really love this build hey! Cheers Johnny.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Tommo52 |
|
|||
|
Thanks guys
More wiring today. Wired the main power feed for thermo fans, fuel pump, EEC Power and Ignition relay. I know soldering isn't the best solution for automotive wiring especially in the engine bay but neither Jaycar or Supercheap or Autobarn had the factory style wiring crimps I wanted.  Test fit the extractors too, after trying to find them for 4 weeks they were hiding in plain sights, gave them a few colourful words once i finally came across them.   It's super tight between the chassis rail and front drive shaft but the local exhaust shop should be able to make it work  
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
Tommo52 wrote: Thanks guys More wiring today. Wired the main power feed for thermo fans, fuel pump, EEC Power and Ignition relay. I know soldering isn't the best solution for automotive wiring especially in the engine bay but neither Jaycar or Supercheap or Autobarn had the factory style wiring crimps I wanted. Test fit the extractors too, after trying to find them for 4 weeks they were hiding in plain sights, gave them a few colourful words once i finally came across them. It's super tight between the chassis rail and front drive shaft but the local exhaust shop should be able to make it work i can see that flange being rotated.....
|
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Hey are they pacemakers?,can see a brand plate on there,seems like a tight fit in some areas though.
Cheers Johnny.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Hey are they pacemakers?,can see a brand plate on there,seems like a tight fit in some areas though.
Cheers Johnny. Sorry bout the stupid double post 
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
