|
| Mad2 |
|
|||
|
johnnyeHCF wrote: Can get a pic in the following days of my ef xr6 if you would like to see what it looks like? xr has a grey interior hence I went with grey vinyl for the headliner. Cheers Johnny. nah mate ..... cloth is fine  plus i want to partly change the color sometime.....
|
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Mad2 wrote: johnnyeHCF wrote: Can get a pic in the following days of my ef xr6 if you would like to see what it looks like? xr has a grey interior hence I went with grey vinyl for the headliner. Cheers Johnny. nah mate ..... cloth is fine plus i want to partly change the color sometime.....No problem mate,I think the biggest problem with the headliner coming down is due to the glue used,especially with the foam crap they add.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Mad2 |
|
|||
|
johnnyeHCF wrote: No problem mate,I think the biggest problem with the headliner coming down is due to the glue used,especially with the foam crap they add. biggest problem is the heat breaking the foam down. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
roof lining now looks like this.......
  altho i 'would' like it a bit cleaner.....    will be bringing a BF wagooon roof back home [from shell i picked up not long back] to use as a template base, so i can see if it will all fit not sure if i should grab a 'basic' wagooon lining just for RWC.......... will also be fitting some sort of roof insulation. Cheers
_________________ http://www.fordmods.com/the-garage-f53/another-box-project-t116037.html Last edited by Mad2 on Wed Nov 13, 2019 9:22 pm, edited 1 time in total. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
also wondering if it's worthwhile fitting the auto dimming rear view mirrors
 ... have loom/s
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
so from this ....
 to this........  hopefully soon[ish] i can slip in some more pics of the interior.....
_________________ http://www.fordmods.com/the-garage-f53/another-box-project-t116037.html Last edited by Mad2 on Wed Nov 13, 2019 9:24 pm, edited 1 time in total. |
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Look's really nice!
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Mad2 |
|
|||
|
johnnyeHCF wrote: Look's really nice! Thanks! under the dash mat looks ALOT betterer coz it took me ages to clean the white crap that was on it. look close at the 1st dash pic & you should see it. i didn't look close enough when i bid on it........ vacuumed the floor half a dozen times with the vax. so it should look a lot betterer... hopefully when the suns out a bit more i will hopefully bring home the roof cut, so i can see "if" i can mod the interior lights to fit. alll tho the missus may say "WTF!"   still have to pull the rear bumper of & drill four 28mm holes in it!.............  .. could not find the right size drill bit locally tho.eventually will fit a 'black' cargo area trim & a factory wheel support from a factory LPG wagooon. plus i also have this to fit as well..... https://www.ebay.com.au/itm/FORD-FALCON-BA-BF-WAGON-WEATHER-SHIELD-WEATHERSHIELD-DOOR-WINDOW-VISOR-GUARD/283258011367?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 sticks to the window rubber so i'm not 100% keen..... |
|||
| Top | |
|||
| Mad2 |
|
|||
|
went to put the repaired centre cap on the wheel...... broke it again
  then i looked at the wheel centre......     as can be seen by the 'blurred' last pic, you cannot fit the left cap into the right cap wheel centre so for some reason i have one odd wheel  goddam it
_________________ http://www.fordmods.com/the-garage-f53/another-box-project-t116037.html Last edited by Mad2 on Wed Nov 13, 2019 9:26 pm, edited 1 time in total. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
anyone able to point out/show the differances between the BA/BF premium front brake caliper and the standard caliper, the bracket holding the brake pads in?? have bought what is supposed to be the larger size, but when i checked against one here it was the same, but differant. lol
 Thanks |
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Mad2 wrote: anyone able to point out/show the differances between the BA/BF premium front brake caliper and the standard caliper, the bracket holding the brake pads in?? have bought what is supposed to be the larger size, but when i checked against one here it was the same, but differant. lol Thanks You mean to fit the larger rotors and calipers?, papasmurf has done this recently and should be able to get you the information needed. Maybe send him a PM.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Mad2 |
|
|||
|
johnnyeHCF wrote: You mean to fit the larger rotors and calipers?, papasmurf has done this recently and should be able to get you the information needed. Maybe send him a PM. ok will do ..... thanks for the heads up
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
Mad2 wrote: johnnyeHCF wrote: You mean to fit the larger rotors and calipers?, papasmurf has done this recently and should be able to get you the information needed. Maybe send him a PM. ok will do ..... thanks for the heads up don't think i can send Papa Smurf a msg .... most of us have the profile/send pm on bottom left of our comments. Papa doesn't. |
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Mad2 wrote: Mad2 wrote: johnnyeHCF wrote: You mean to fit the larger rotors and calipers?, papasmurf has done this recently and should be able to get you the information needed. Maybe send him a PM. ok will do ..... thanks for the heads up don't think i can send Papa Smurf a msg .... most of us have the profile/send pm on bottom left of our comments. Papa doesn't. Hopefully he may log in and see your post,but essentially it's just a slightly larger carrier for the larger caliper but still bolts to the same spots/way the other carrier does. Do you have the larger rotors and calipers?
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Papa Smurf wrote: Sorry it took so long for me to answer, sorry. I have standard XR shocks and springs to add, new lwr front control arms, new upper inner bushes, ball joints. I also have the upgraded BF 322.mm and 328.mm calipers plus discs to add. I have brand new rear arms and and also will be pulling out the cradle to change it's bushes. I have been waiting for the weather to be a little better.  This is a quote from papasmurf from fg manifold conversion thread.not sure if this helps at all?
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 11 guests |
