|
| Mad2 |
|
|||
|
wellll it is with a heavy heart . . . . . . .... that i say goodbye to 'Ol Yella
 R.I.P. 'ol yella ...... gunna miss you  ministry of war said NO to resuscitation attempts 
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
found a manual box [and parts] which has now been bought & paid for
 struggled to find out what the roof linings are made of ....... believe i now know & how to repair have fitted a replacement sill cover .. not quite happy with it as missing two plastic lugs, however did fit one sill clip at the rear ....... just need to figure out front attachment  front disc's & pads have been replaced as has missing rh front mudguard. bought some LTD/Ghia door trims awhile ago & matching chrome door handles have just arrived  had a small[ish] play with some interior 'stuff'  picked up the box & parts...... 
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
ok. currently trying to pull shifter 'knob' off ...............
  not sure on how to pull it apart without breaking something else and as you can see the vinyl piece around knob has come off .....  have already tried pulling the trim piece holding the vinyl covering on shifter......... & have now hopefully repaired it   [altho the 'chrome' plastic covering is a bit soso] and that metal ring that you have to remove...................   have just picked up some SY [?] Territory rear passenger seats [not 3rd row] for a looksy at how it goes together....... what a heavy forker it is & might only use the headrests 
_________________ http://www.fordmods.com/the-garage-f53/another-box-project-t116037.html Last edited by Mad2 on Sat Jan 18, 2020 10:10 pm, edited 1 time in total. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
.....
anyway picked up another item for my collection............ no not the car .... the front bar  so this along with the manual box will be fitted after rego & a rebuild of her car's suspension........... 
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
.....
what the ! ..... bloooody double post
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
hope everyone had a great day yesterday
tried doing a bit more on the wagooon ........ found a cupla areas i didn't like this is the passenger rear wheel well .... at the rear of  at the front of the passenger rear wheel well.... somewhere above the shocker  when i removed the bolt for the spare wheel holder support..... aftermarket - so i could remove & clean the side panel  base  would there be any hassles/problems with mounting the factory mount instead??  was thinking a flat plate between the rear mounts & plate welded on inside of support plate [on inside of boot rail] with a flat plate under floor. flat plate would be a bit bigger than the aftermarket plates fitted. refer pic below  yellow lines refer to where plates would be fitted with one in wheel holder welded in this IS what i would prefer to put in instead of using the original color mat.     i do have a better condition items currently put away [used] also found that one of the retaining spring clips on a rear pad had NOT been fitted properly [was sticking out of the caliper not in]....... 
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
looks like i will be going with the factory spare wheel mount as the AU spare wheel holder [aftermarket] has the rear resonator in the way of the bolts .....
Mad2 wrote: would there be any hassles/problems with mounting the factory mount instead?? was thinking a flat plate between the rear mounts & plate welded on inside of support plate [on inside of boot rail] with a flat plate under floor. flat plate would be a bit bigger than the aftermarket plates fitted. refer pic below yellow lines refer to where plates would be fitted with one in wheel holder welded in i noticed the AU had flat plate from rail bolts to smaller bolts, will incorporate this idea as will save welding factory bracket to rail due to resonator in the way. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
Mad2 wrote: looks like i will be going with the factory spare wheel mount as the AU spare wheel holder [aftermarket] has the rear resonator in the way of the bolts ..... :doh i noticed the AU had flat plate from rail bolts to smaller bolts, will incorporate this idea as will save welding factory bracket to rail due to resonator in the way. welll underside of car is now clean :lol hopefully i missed nothing bolts on the factory holder are slightly positioned differantly to the AU holder...... will see how i go  going to try the smartbar on the BF wagooon to get an idea on how it will fit & what problems i may have.   going pack to pullit & grab some more items & wheels....
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
was having a 'look' at me parts & cars
....... and noticed the spare wheel holder in the back of the red EB wagooon ..... simpler design, but using the black trim & 'carpet' i have a 'hole' that must be filled. refer pic using the unit from the red wagooon [which was made using bent flat plate. you will understand when i put a pic up] i would then need to either enlarge the base plate to suit the factory lpg liner/carpet OR go to a replacement floor mat...... which would be plastic link- https://www.ebay.com.au/itm/Custom-Moulded-Rubber-Boot-Liner-Ford-Falcon-Wagon-AU-BA-BF-1998-2008-Cargo-Mat-/262738822640?hash=item3d2c7445f0 pic of item  tempting item.............. found some good pics of the smartbar fitted to a ute.   hopefully i can do as good a job on mine
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
Mad2 wrote: Mad2 wrote: Originally Posted by mad2 was having a 'look' at me parts & cars ....... and noticed the spare wheel holder in the back of the red EB wagooon ..... simpler design, but using the black trim & 'carpet' i have a 'hole' that must be filled. refer pic using the unit from the red wagooon [which was made using bent flat plate. you will understand when i put a pic up] i would then need to either enlarge the base plate to suit [the factory lpg liner/carpet] OR go to a replacement floor mat...... which would be plastic latest query is ..... which to use 1. original aftermarket wheel holder  2. original factory wheel holder 3. another earlier aftermarket wheel holder  4. take a leaf outa Drew's BF AWD Falcon Wagon wheel holder    would eventually use the rubber unit if it's actually as good as it looks online so which one should i use ? |
|||
| Top | |
|||
| Mad2 |
|
|||
|
Mad2 wrote: sooo....... have bit the bullet & using the spare wheel holder from the AU... as it will "sit" betterer... will put up pic of it tomorrow. it sits closer to the side of the car better & will insert another two bolts inside [beside] the cargo area rail with a plate [depending on how wheel sits 'in it'].also picked up a BA/BF wagooon headlining [plain], FG ute head lining [with overhead light & standard interior light plus microphone] & a Territory headlining [with sunglasses holder & dimmable mirror]. will go back next week for the alloy wheels i forgot & a FG sedan roof lining with overhead light & standard interior light. :party2 AU wheel holder on left ....   took pics maybe 1/2 hour ago so night piccies [couldn't see where to point the camera ] ... as mentioned the one on the left is the AU unit & with it sitting the way it is has the two bolts going through the chassis rail in the same place, just need to remodel & clean up the 'front' edge as it has been cut & bent slightly. might even move the flap at the base [inbetween the uprights] as it angles the wheel towards the side glass also fitting the terri &/or the FG sunglass holders means converting the terri/FG sunvisors.........
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
came across a "smartbar" so bought it....
 on another note..... Quote: how many 'styles' did they make of this wheel style ?? - rechecked & not the same  coz my 'odd' wheel centre does NOT look as per pic above where the wheel cap goes it is a smaller opening for the cap to sit in [and more 'meat' between the wheel nuts/centre cap] & where the cap 'legs' go the wheel angles in so i cannot use ones i have here will have to recheck the ones at the wreckers so i need to find another that matches the other 3
_________________ http://www.fordmods.com/the-garage-f53/another-box-project-t116037.html Last edited by Mad2 on Sat Jan 18, 2020 10:14 pm, edited 1 time in total. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
new cargo floor cover arrived & was trial fitted. i like it!
 will need to replace the grey carpet tho having a muck around.......    wagooon should be done shortly as redoing the headlining......
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
have 3 BA/BF wagooon headlings.........
1 - will use AU sunglasses holder & NF/NL interior light. fitted with 5 small interior lights  2 - will use SX/SY Terri sunglasses holder & interior light. will have to use terri sunvisors.  or 3 - will use FG sunglasses holder & interior light. will have to use FG sunvisors. should be "interesting" not sure on fitting some small interior lights to 2 & 3
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
Mad2 wrote: have 3 BA/BF wagooon headlings......... 3 - currently don't have a suitable FG roof lining to take a pic of. will use FG sunglasses holder & interior light. will have to use FG sunvisors. should be "interesting" not sure on fitting some small interior lights to 2 & 3 finally recieved the FG/Terri sunglass holders. the ute lining i grabbed [shown fitted with the Terri holder] was fitted with the FG standard interior light.  with ute headlining trimmed a little  funny part i found was the FG plastic support was the same width between sunviser holder clips as AU/BA/BF which i was not expecting. now on the lookout for a sedan lining |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 10 guests |
