|
| Waggin |
|
|||
|
Southy wrote: why wouldnt u touch the timing? all u need is a timing light and to move the dizzy around to the right place. i couldnt do it but my dads a mechanic and we done it when we rebuilt my brothers car. haha by the way my brothers car is a SVO as well, Ea SVO, cheers
As CHEF said, just back the timing off a touch by adjusting the base timing position of the dizzy. It isnt ideal, but it will do the job
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
Waggin wrote: Southy wrote: why wouldnt u touch the timing? all u need is a timing light and to move the dizzy around to the right place. i couldnt do it but my dads a mechanic and we done it when we rebuilt my brothers car. haha by the way my brothers car is a SVO as well, Ea SVO, cheers As CHEF said, just back the timing off a touch by adjusting the base timing position of the dizzy. It isnt ideal, but it will do the job Agreed. Better off avoiding detonation at the expense of some low/midrange torque. Cars dont tend to go too hard when pinging their nuts off anyway. I'd go for something steeper than a 2:1 regulator. I run a 12:1 on mine and she's got 8 of the little buggers injecting fuel....
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| CHEF |
|
|||
|
Yeah, the old dizzy trick works well, better than I expected anyway... I have been to lazy to wire my wolf for ignition but I will do it soon
|
|||
| Top | |
|||
| SVO XR6 |
|
|||
|
i thought that the ecu overidded the dizzy if a largish change was made?
sorry, i ment a 12:1
_________________
|
|||
| Top | |
|||
| FPV_GTp |
|
||
|
hi guys
just curious what people are using on there ford inline 6 cylinder 4 lt engines , im aware other facts will affect the performance of the vehicle so just wanting to know what turbo brand , size and compressor housing and wheel trims and exhaust housing and wheel trims people are using ?? what RPM ur starting to boost ? to what max RPM ur turning ur engine ? what boost pressures ur running ? what horsepower ur producing ? ( dont care whos dyno its run on ?? LOL 
exhaust manifold type ? and the rest of the exhaust system ? inlet manifold type? engine compression ratio ?? ECU type ? and any other information u wanna share ????
cya
_________________ WANTED - Complete BTr4 and zf 6hp26 automatic transmission 6 cylinder and V8 transmission(s) suit rebuild? Drop me a PM if you can help would be greatly appreciated - thanks |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Not mine but this is agood combo...
GT35/40 Garrett turbo.. 46mm external wastegate... Seamless steam pipe exhaust... EMS 8860, 42Lb injectors... Walbro 255 intank fuel pump... Sard adjustable fuel reg set at 45 Lb @ idle.... Stge ll Crow cam... 2500 stall converter... Engine is TOTALLY std as supplid from wrecker, except cam... Tuned by Adam at www.justenginemanagment.com.au Spools as soon as foot isplanted but real power from 2800 rpm... 280 rwkw wih safe tune... Safe as in 8* total timing at 15 Lb boost wot... So far 1/4 times 11.56
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 6 guests |
