Fordmods Logo

ED Fairmont ABS probs 

 

Page 1 of 1 [ 3 posts ] 

 
 Post subject: ED Fairmont ABS probs
Posted: Sun Dec 26, 2004 12:40 am 
Fordmods Newbie
Offline

Posts: 19

Joined: 17th Dec 2004

Gallery: 4 images

Ride: ED Sprint/Fairmont

Location: melbourne
VIC, Australia

Hey all, see if anyone can help me with this one...


For no apparent reason the ABS light came on one day. As i have had this problem before and i just ignored it and it went away, i did the same again until today about 5 mins into driving the car i tried to pull up at an intersection and the pedal was stiff!!!, i pushed hard with both feet and the car just kept rolling!!!!

After about 5 sec, the pedal went soft and i came to a very abrupt stop. i believe the modulator had kicked in for and was back pressuring for some reason. felt like when abs kicks in and the pedal pushes back a little, the i couldn't move it at all, it was pushed all the way out...

This happened twice in the day but after it happened, it just drove normally, both times within say - 5 mins of starting the engine. But this happenes intermittently - Got me stuffed!!!

[/img]
Top
 Profile  
 
 
Posted: Sun Dec 26, 2004 9:48 am 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 482

Joined: 6th Nov 2004

Gallery: 3 images

Ride: EBII 220kw Tickford powered.

Location: Belconnen, Canberra
ACT, Australia

First thing to do would be to get your car up in the air, safely of course!
Then go round each wheel sensor, carefully remove it from its mount and clean the whole thing, and reassemble.
You will find that a lot of crap builds up on the sensors (some of it being iron based particles from brakes and or pads), which can trick the abs into thinking there is a fault.

 

_________________

The car should be called "Frankenstien". EBII GLi skeleton, AU T2 220kw heart, AU2 brain, EF/EL for everything else.

"Bitza" Member 28 on FORDMODS v1.0 Joined 28-04-2002
"TS50EB" Member 300 on FORDMODS v1.1 Rejoined 6-11-2004

Top
 Profile  
 
 
Posted: Sun Dec 26, 2004 11:37 pm 
Tyre Shredder
Offline
User avatar

Posts: 387

Joined: 12th Dec 2004

Gallery: 4 images

Ride: 2005 Hi-Ace

Location: melbourne
VIC, Australia

when my abs light stayed on i took it to a mechanic to plug it into the diagnostic computer to see which fault codes came up. mine ended up being the ECU which is apperantly common on these models. also when the ABS light is on the ABS is disabled and your brakes should still function as normal.

 

_________________

2005 Toyota Hi-Ace aka ICE CUBE

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Apr 20, 2024 5:05 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names