Fordmods Logo

diy lsd changeover 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: diy lsd changeover
Posted: Thu Jan 20, 2005 6:05 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 2280

Joined: 5th Nov 2004

Ride: EF Falcon 95

Location: Rosebud
VIC, Australia

fellas,


just wondering whats involved in taking the LSD parts and diff gears out of my mates wrecked ef, and stuff em into my single pegging ef? is it a big job or what, can it be done by a fairly mechanical minded person?

from what i know i need the speedo gear, the LSD hat (i think its called a hat) the gears, and yeah. anyone here from melbourne done it b4 and feels like assisting to do it again?

 

_________________

Cougar Zero makes my pants fit nice.

Top
 Profile  
 
 
Posted: Thu Jan 20, 2005 6:30 pm 
Oompa Loompa
Offline
User avatar

Age: 40

Posts: 22

Joined: 5th Nov 2004

Ride: NCII Ghia

Location: Geelong
VIC, Australia

It would be pretty hard to change the diff centers over as you have to shim it properly if you want it to last. If your mates diff housing is still ok I would be changing the whole lot over. And you could still run your own brakes and axels if you wanted to.
Top
 Profile  
 
 
Posted: Thu Jan 20, 2005 9:27 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 2280

Joined: 5th Nov 2004

Ride: EF Falcon 95

Location: Rosebud
VIC, Australia

well yeah ill probably change the whole center over, how hard is that to do?

 

_________________

Cougar Zero makes my pants fit nice.

Top
 Profile  
 
 
Posted: Fri Jan 21, 2005 1:09 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

mrnasty wrote:
well yeah ill probably change the whole center over, how hard is that to do?
well yes take his centre out and yours and then put his centre in your housign :)

to do it you need to remove the axles on your car.
wheels off , then the disks
there are 4 allen key bolts u need to undo through the hub. put the disk on backwards with 3 wheel nuts and use that as a puller :) to remove the axle
then take the bolts holding the diff in out and pull it out
install is reverse of removal
graba gregorys book to help u

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Fri Jan 21, 2005 1:25 pm 
Getting Side Ways
Offline
User avatar

Age: 45

Posts: 1434

Joined: 5th Nov 2004

Gallery: 15 images

Ride: ALTED XR6 - ALTED EA - EF TAXI

Location: Sunshine Coast QLD
QLD, Australia

Done quite a few LSD center change overs, Mainly just the centers, but have changed ratios before,

Just remember when unbolting the crown wheel, that its a LEFT HAND THREAD bolt, so oppersite from undoing .

Also, Align all the shims and match them up the way they came out, a black permantent texta is good for that .

If you are changing the ratio, You need to have the matched pinon and gears for it .

So, say if you have a 3.08:1 open wheeler, and you want to put in a 3:45:1LSD you can't just change the crownwheel, you have to have the pinon to match it too .

The gears don't mix & match very well, thats when you start to get whining, And also, If the shims are not back in the right place, same thing happens .

But just replacing the center it not to hard at all .. Just make everything the way it came out, and put it back together with the new center in,

Oh, and remember to get LSD oil :)

And another tip, Don't get to exicted about it all before you startit (like i did) , and forget to empty the old diff oil out first!

Also, The diff oil smell with make you pass out!
Top
 Profile  
 
 
Posted: Fri Jan 21, 2005 6:43 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 2280

Joined: 5th Nov 2004

Ride: EF Falcon 95

Location: Rosebud
VIC, Australia

hmm, sounds like a prick of a job actually. might just rip the whole diff out of his car disc to disc chuck it in a trailer and take it to a diff joint or a mechanic and say put this in!

 

_________________

Cougar Zero makes my pants fit nice.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Apr 20, 2024 3:51 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names