|
| Pane |
|
||
|
g'day
I'm half way through planning my engine build and have struck a problem. The T5 gearbox i have is out of an ed xr8, nothing wrong with that but i'm planning to connect it to a 6 cylinder. I'm led to believe that the 6 cylinder and v8 input shafts on the boxs are different lengths. Can i use the input shaft from a 6 cylinder box and put it straight into the v8 gearbox? If i can change them over how hard is it/expensive to do so. Cheers
_________________ If its too loud your too old!!!!!!!!!!!! |
||
| Top | |
||
| xr8 dismantler |
|
|||
|
the V8 and the 6 box will interchange. you wont need to change anything to bolt it in.
|
|||
| Top | |
|||
| XR8Chic |
|
|||
|
I was led to believe that they are had a different length input shaft. (V8 Longer than I6). I know a few people who have used I6 T5's in there V8's and they got the input shaft lengthened so that it would fit.
I know they also have different gear ratio's between the t5 in the I6 and the V8
_________________ 1993 ED XR8 - Poly Green |
|||
| Top | |
|||
| sam12h |
|
|||
|
here is the link to my similar question on here
http://www.fordmods.com/phpBB2/viewtopi ... highlight= & a similar question on fordforums http://fordforums.com/showthread.php?t=89899 turns out they are different & the input shafts cannot be interchanged. 'special' hybrid input shafts can be purchased/fabricated but read for yourself.
_________________ Production Editor of Performance Motoring at Express Media Group |
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
I'd be inclined to take darren's word for it.... i understand ferntree do conversions...
What about bellhousings? I assume these would be different?
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| sam12h |
|
|||
|
how bout swapping it with someone who has an i6 t5 and wants a v8 t5, with a cash adjustment. i paid $1600 for my conversion and all parts were used. the i6 equivalent goes for $750-800 from an ea. you would make a profit, just make sure you get one from an eb2 or newer (stronger, more reliable).
_________________ Production Editor of Performance Motoring at Express Media Group |
|||
| Top | |
|||
| altedxr6 |
|
|||
|
here we go
That was from the service manual from an EB1 S XR8 [/url] |
|||
| Top | |
|||
| XR8Chic |
|
|||
|
4.9 EF Futura wrote: I'd be inclined to take darren's word for it.... i understand ferntree do conversions...
What about bellhousings? I assume these would be different? Yeah - bell housings are different!! Maybe darren meant to say that they will NOT interchange, and just left the "not" out...
_________________ 1993 ED XR8 - Poly Green |
|||
| Top | |
|||
| Pane |
|
||
|
Thanks guys
Thats what i thought. I might do the swap/sell thing. The box has been fully rebuilt to standard specification. Hasn't had any oil in it as yet. Its worth a bit of cash. Cheers
_________________ If its too loud your too old!!!!!!!!!!!! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 32 guests |
