|
| B0XCAR |
|
|||
|
You wont need to roll the gaurds! Mate had 19's and ultra low's on a eb and didn't scrub!
|
|||
| Top | |
|||
| quik_ED |
|
|||
|
mine dont scrub but my wheels come up and catch the inner guard and now thats been peeled down and takes slices out of my tyres
|
|||
| Top | |
|||
| peaandham |
|
|||
|
Well if i dont need to roll the guards i just need to fit the springs on the stock shocks unless i can find lowered ones cheap !
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| quik_ED |
|
|||
|
i find that its mainly drive ways and turning onto a street where the roads join and there is a dip there is allways a shank for my car lol so i hav 2 go fairly slow for these
|
|||
| Top | |
|||
| B0XCAR |
|
|||
|
That inner gaurd lip is a easy fix
 Just push them in a little.. Mine didn't get anywhere near the tire.. Just lower it, If it does scrub then go get them rolled... you might be wasting money if you get them rolled now.
|
|||
| Top | |
|||
| peaandham |
|
|||
|
OK thats one problem out of the way now the other is whether i will wait a bit and put the ssl springs on the stock shocks or whether to wait a two or three weeks and get lowered shocks !
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| B0XCAR |
|
|||
|
SSL :\ didn't you say SL?? Lol
Up to you the stock shocks are alright till Superlow's you can just go out and buy KYB gas shocks.. thats all my mate's use on there SL and L's and there about $40 worth each. |
|||
| Top | |
|||
| quik_ED |
|
|||
|
i got pedders sports riders and they seem to do a pretty good job but they are probs a bit more than what you mentioned, i wouldnt know how much exactly but when they came on my old car the guy said he paid almost 2k for the whole suspension set up including springs
|
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
luke i had those lovells sl's on pedders gsr's on the front of my ef, the top of the tyre was half covered by the guard, made them almost 5" lowered. dont buy lowered platform front shocks to go with them, just shorter stroke ones if u need to. the rears rode nice with kyb's
|
|||
| Top | |
|||
| peaandham |
|
|||
|
Thanks guys and yes i mean SL lol my bad !
Hey Craig where would be the best place to look for some of the shocks you mentioned ! Also im thinking whether i want to downgrade to low springs !
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| B0XCAR |
|
|||
|
I'll trade my springs Lol! It sits nice with 18's!
|
|||
| Top | |
|||
| Steve-.-Dude |
|
||
|
hey luke i seen ya car at ya work the other day looks sweet with the new rims!!
_________________
|
||
| Top | |
||
| peaandham |
|
|||
|
Hey uniacidz i am not trying to copy you hahah but it would be a nice ride to copy, i dont think it really needs to be lowered looking at the side but looking straight at the back i think just lows will do it !
Thanks Steve-.-Dude i think they make the car look longer !
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| peaandham |
|
|||
|
Thinking some of those red Brembo Caliper covers off Ebay !
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| peaandham |
|
|||
|
Well im 18 today and going out tonight and between seeing family today i went and started sanding my nut (it hurts to think about it) thats on the end of my shaft (not sounding any better) from black to a polished Grey to suit my chrome shaft ! I only stopped once i had realised that i had no clear coat so i gave it a quick wet n dry and i will finish it when i get some clear coat (but it will require some more sanding to get rid of the black bits that are left !
This took me about 10-15 Mins by hand ! (No hand sander)  By peaandham, shot with FinePix A600 at 2009-11-21  By peaandham, shot with FinePix A600 at 2009-11-21
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 10 guests |
