|
| XH5LWEPN |
|
|||
|
xr8ute wrote: XH4LWEPN wrote: What everyones thoughts on clearance issues with what i will be running. My thoughts are... "at the end of the day, it will all be worth it"  Haha thanks, it definately will be worth it thats for sure. But honestly ya reckon i'll be pushing it or what?
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| fairy v8 |
|
||
|
clearance should be ok? ive got 61cc chambers 20 thou off gt40ps with 1.7s and .544 lift it was borderline ,my reconditioner said as long as im not exceeding the stock rev limit it would be ok ...its been alright so far ...i cant remember what figure i came up with..sorry
 oh on a stock block au
|
||
| Top | |
||
| xr8ute |
|
||
|
I think you would be pretty unlucky if it didn't have adequate clearance as it is.
Also depends a liitle on wether you install the cam straight up, or if you advance/retard the timing a little. I think you'll be fine... (but I wouldn't bet an engine on it  )
|
||
| Top | |
||
| EBXR8380 |
|
|||
|
Its not hard to get some model clay flatten over piston, fit some old head gaskets and bolt head on and turn engine over!!!
DEAD set min clearance 0.080 ....
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
Cheers guys, just have to wait and see how much clearance i got during assembly.
Good news, picked up all parts today, took a couple of quick pics. Do you think it would be worth getting the ports cleaned up abit & polished due to the CNC machining ridges left in there? Motor is coming out this weekend, should be quite straight forward, with the help from mate at work and plenty of brews. Hopefully will be dropping it off to BPT during next week. Just need to get a couple more bits & peices like rest of gaskets, core plugs, HV oil pump etc and maybe some new bearings to spin into the bottom end. Wouldnt expect to be up and running for a month or so yet as the ute itself will probly be goin to the panel/paint shop while the motors out. Will keep posted of build progress as we go and will let yous know of any hiccups or so throughout. Also have a few more pics here if anyone wants pics of ports, chambers etc. cheers Jeff You do not have the required permissions to view the files attached to this post.
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| 409Stroker |
|
||
|
GO THE MIGHTY CLEVLAND these are the pics of the heads of my 393clevo they are CHI 3V's if you want to see more picks of the set up i have check out my pics in the vault under my name... CHEERS....
You do not have the required permissions to view the files attached to this post.
_________________ If you have it under control then you dont have enough power..
|
||
| Top | |
||
| -clampy- |
|
||
|
hehe yeh you wont beleive the difference going from GT40p heads on your XH to the afr165s..
i went from e7te heads! but i have a bit more work to do to realise the full potential of the car
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| XH5LWEPN |
|
|||
|
-clampy- wrote: hehe yeh you wont beleive the difference going from GT40p heads on your XH to the afr165s..
i went from e7te heads! but i have a bit more work to do to realise the full potential of the car I have e7te's on the ute aswell, pretty sure only a small amount were treated to the gt40p's and unfortunately mine wasnt one of them. Cant wait till its all up n running. Yeah you need to hurry up n get it tuned , should have plenty more in it.
Have you done anything with the exhaust yet?
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Leave the ridges there...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| -clampy- |
|
||
|
booked in monday for 3" lukey single and two hotdogs
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| XH5LWEPN |
|
|||
|
-clampy- wrote: booked in monday for 3" lukey single and two hotdogs
Cool mate, any reason you went for the 3" single over the twin system? How far away is the twEECer?
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| Steady ED |
|
|||
|
I'm so jealous of your sexy AFR 165s lol
Out of, er, interest, did you guys order them from the states, or locally?
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| Kilma |
|
|||
|
I know clampy ordered them locally from A1 Hi Performance. They were charged with the task of getting them from the states.
_________________ The fast fun: Suzuki GSXR1000
|
|||
| Top | |
|||
| -clampy- |
|
||
|
a1 sourced them from a stockist over east- hpw.
went for 3" single because of cost and simplicity.. too many places were b**ch about doing twins on these cars because of the plastic fuel tank and lack of room. i have the tweecer here, just waiting for pete to do some jazz to get it working, then after that its tune time.
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| Steady ED |
|
|||
|
ta for the info kilma and clampy.
Might think about joining team AFR 
Be good to see what yours picks up after the tune clampy. This thread is pretty gold, got some great info in here.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 20 guests |
