|
| ringastinga |
|
||
|
TROYMAN wrote: did it strip the gear on the shaft like it did to the first one??
do you think there might have been some damage to the dizzy gear from the first failure causing the second aux shaft to fail?. i still cant beleive it only lasted 2 hours  .also i was going to ask you did ford specify what engine the new shaft was for? eg..eb/ed/el or ef/au? im just curious if there was a different part number between the dizzy and non dizzy engines? the dizzy was replaced with brand new bosch they say all aux shafts are the same in dizzy engines ie EA, EB, ED, EL my engine is EB and i converted to EL (dizzy engine) |
||
| Top | |
||
| ringastinga |
|
||
|
PIMP_LTD wrote: Whatever the cause is, i still don't get why it blew in 2 hours???? Its like it was made of f**k plastic.
tell me bout it but JMM recon theyve seen it a few times and every time its damaged block |
||
| Top | |
||
| ringastinga |
|
||
|
UPDATE:
I am now looking for a second hand motor to chuck in my car till i get time and decent $$ to re-bore and so-on a new block any1 know of 1 or somewhere i can get 1 in vic?? |
||
| Top | |
||
| gogetta |
|
|||
|
JMM are far from experts...
_________________ |
|||
| Top | |
|||
| TROYMAN |
|
||
|
ringastinga wrote: TROYMAN wrote: did it strip the gear on the shaft like it did to the first one?? do you think there might have been some damage to the dizzy gear from the first failure causing the second aux shaft to fail?. i still cant beleive it only lasted 2 hours .also i was going to ask you did ford specify what engine the new shaft was for? eg..eb/ed/el or ef/au? im just curious if there was a different part number between the dizzy and non dizzy engines? the dizzy was replaced with brand new bosch they say all aux shafts are the same in dizzy engines ie EA, EB, ED, EL my engine is EB and i converted to EL (dizzy engine) bummer... it might just be that the block is now stuffed.. just out of curiosity what oil were you running in it? if the oil is quite thick i guess it could put extra load on the pump being a high volume one? which puts more load on the dizzy gear but i cant see that killing the shaft in 2 hours.. do you have any pics of the first shaft that failed? it might show some signs of wear on the journal surfaces confirming block damage? |
||
| Top | |
||
| ringastinga |
|
||
|
TROYMAN wrote: ringastinga wrote: TROYMAN wrote: did it strip the gear on the shaft like it did to the first one?? do you think there might have been some damage to the dizzy gear from the first failure causing the second aux shaft to fail?. i still cant beleive it only lasted 2 hours .also i was going to ask you did ford specify what engine the new shaft was for? eg..eb/ed/el or ef/au? im just curious if there was a different part number between the dizzy and non dizzy engines? the dizzy was replaced with brand new bosch they say all aux shafts are the same in dizzy engines ie EA, EB, ED, EL my engine is EB and i converted to EL (dizzy engine) bummer... it might just be that the block is now stuffed.. just out of curiosity what oil were you running in it? if the oil is quite thick i guess it could put extra load on the pump being a high volume one? which puts more load on the dizzy gear but i cant see that killing the shaft in 2 hours.. do you have any pics of the first shaft that failed? it might show some signs of wear on the journal surfaces confirming block damage? oil was 10w 40 im not at home atm but will get pics up but mine didnt sheer like urs it took small chunks out of some of the gear |
||
| Top | |
||
| ringastinga |
|
||
|
banarcus wrote: re-bore and stick a white metal bearing in there,
i think this may be my best option as my engine is bored out and decked and the money saved on boring and honing can be possibly spent on doing this |
||
| Top | |
||
| gogetta |
|
|||
|
yeah it is possible to fit a bearing but I imagine that wont be cheap...
also i thought AU's used 10W30...saw it in the spares dept today at binks ford in footscray....jeez what dodgy place
_________________ |
|||
| Top | |
|||
| ringastinga |
|
||
|
i cant see how even if i put water in there an auxillary shaft would go in 2 hours, today i saw a second hand motor running and seems very good for $450
|
||
| Top | |
||
| Krytox |
|
|||
|
very expensive!
Get a wreck from jolly's I bought a 100,000k AU2 one for $117 hell, you could buy a complete EF for $450
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| ringastinga |
|
||
|
jolly's quoted me $500
|
||
| Top | |
||
| ringastinga |
|
||
|
if any1 can beat that price ill buy it pick up on saturday
|
||
| Top | |
||
| Krytox |
|
|||
|
you HAVE to remove it yourself.
Pick a car in the yard, go by K's. remove (use their crane) Purchase *they'll provide you a receipt with the engine number on it* An item that's off the shelf is $500 and maybe cheaper if you give them a c/o.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| ringastinga |
|
||
|
i dont want to change over so if i remove the motor it'll be like $100??
|
||
| Top | |
||
| ringastinga |
|
||
|
oh and how do u know k's?? they never have batteries or keys??
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 3 guests |
