|
| TROYMAN |
|
||
|
welded inside aswell
 a clean up with a wire wheel, painted the pan and fitted the sender..  did the trans service my self, all up including fluid and service kit was $60.. there was a bit of black sludge in the pan which looks like clutch and band material? otherwise i guess its not to bad for a box that came out of a 400,000km car.. notice there was no magnets in the pan, thats strange??   all done and the new pan is fitted..  
|
||
| Top | |
||
| huggiebear |
|
|||
|
where did you the the wire into the cabin? i was thinking of putting a little 8mm hole and gromit under the console to keep the wire short and out of the way
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
there is a small hole in the firewall near the trans tunnel just below the heater box..this hole is used for the boost gauge line aswell..
|
||
| Top | |
||
| bry40l |
|
|||
|
Nice trans sump, shame about the filthy trans lol
_________________ BF XR6 |
|||
| Top | |
|||
| huggiebear |
|
|||
|
if you think thats filthy you havnt been under many e-series have you?
|
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
huggiebear wrote: if you think thats filthy you havnt been under many e-series have you? Clearly not lol. Nice work on the sender Troyman! Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| TURBO_GHIA |
|
|||
|
copy cat troyman
 looks good mate perfect spot for it
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
ToranaGuy wrote: huggiebear wrote: if you think thats filthy you havnt been under many e-series have you? Clearly not lol. Nice work on the sender Troyman! Cheers ToranaGuy you should have seen the box before i fitted it, the car it came out off had many years of oil build up from leaky rocker cover and sump, it looked like a oily fluffy turd...lol TURBO_GHIA wrote: copy cat troyman looks good mate perfect spot for itcheers, i had planed on putting it in the side, but your spot was perfect and known to work..
|
||
| Top | |
||
| bry40l |
|
|||
|
TROYMAN wrote: ToranaGuy wrote: huggiebear wrote: if you think thats filthy you havnt been under many e-series have you? Clearly not lol. Nice work on the sender Troyman! Cheers ToranaGuy you should have seen the box before i fitted it, the car it came out off had many years of oil build up from leaky rocker cover and sump, it looked like a oily fluffy turd...lol TURBO_GHIA wrote: copy cat troyman looks good mate perfect spot for itcheers, i had planed on putting it in the side, but your spot was perfect and known to work.. I was just looking at that yellow stain lol, on closer inspection it isnt that dirty..for a btr anyway
_________________ BF XR6 |
|||
| Top | |
|||
| TURBO_GHIA |
|
|||
|
hey troyman
i saw ya car in weatherill park today mate . new front bar looks good
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
TURBO_GHIA wrote: hey troyman i saw ya car in weatherill park today mate . new front bar looks good thanks mate, i was doing a few days work near by. |
||
| Top | |
||
| TROYMAN |
|
||
|
did a few small mods during the week, the first was move/ change the angle of the temp gauge. i had it flush mounted to the clock facia but when sitting in the drivers seat it wasnt really viewable.
so i used some 2" pvc pipe mounted it at an angle in the facia, painted it to match and done..    the 2nd mod was a bit more usefull.. when i recently changed the brake master cyl, when i push the brake pedal the firewall actually had a bit of flex to it. i have seen a few e series with home made brackets from the shock tower to the master cyl to stop that flex, well i decided to make one up and i found it has made a very slight improvement in brake responce when brakes are firmly pushed and there is no more firewall movement.. i made the brace from a old valiant guard brace..   
|
||
| Top | |
||
| BenJ |
|
||
|
Hmmm, very clever.
Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| ToranaGuy |
|
|||
|
Nice idea on the brake master bracket Troy!
Early commodores had these as the firewall had a lot more flex than those in our Eseries car's. I might have to see if I can track down a bracket & fit one to my car's, I can feel the firewall flex when the peddle is jumped on hard in emergency situations.... Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| TROYMAN |
|
||
|
thanks guys,
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 19 guests |
