|
| kick_ass_ford |
|
|||
|
No running 18s but it's all standard any speeds gear the same will work just need one for the red gear
_________________ EF XR6 |
|||
| Top | |
|||
| SWC |
|
||
|
Just clarify for me what you are after,
Are you wanting the speedo drive gear or the Transducer unit (has the gear on it and bolts to the side of the gearbox). Have you changed the gearbox recently? Curious as I am wondering that if you have an EF XR6, how did you wind up with the incorrect speedo gear in it? |
||
| Top | |
||
| kick_ass_ford |
|
|||||
|
The transducer unit. I have just finished re building the box and I dropped it and cracked some teeth on itso I cut the shaft of and chi lucked it in to test the box was working all good just need to replace it now
_________________ EF XR6 |
|||||
| Top | |
|||||
| SWC |
|
||
|
I believe the transducer is the same for both the BTR 4 speed as well as the T5 5 speed.
Still interested to know why you have a red gear if it is an XR6. (gears are the same fitment for BTR or T5) |
||
| Top | |
||
| kick_ass_ford |
|
|||
|
We'll as all e series there not one owner god knowes what's been done in the past
_________________ EF XR6 |
|||
| Top | |
|||
| SWC |
|
||
|
kick_ass_ford wrote: We'll as all e series there not one owner god knowes what's been done in the past Fair enough,  .
|
||
| Top | |
||
| kick_ass_ford |
|
|||
|
If you think it's te same as the auto one I'll flog one tomoz from the wreckers and have a look how that goes
_________________ EF XR6 |
|||
| Top | |
|||
| SWC |
|
||
|
Grab one from an XR or a Fairmont Ghia (EF seresII or EL) and you should get the correct drive gear as well.
|
||
| Top | |
||
| kick_ass_ford |
|
|||
|
I'll make sure it's got the same teeth as we'll
_________________ EF XR6 |
|||
| Top | |
|||
| TROYMAN |
|
||
|
the transducers are the same from ea to au auto and manual..
purple or pink gear is ea with 2.77 or 2.92 ratio. brown is ed,ef,el,au 3,08 ratio green is eb,ed,ef,el,au 3,23 and 3.27 ratio grey is ed,ef,el,au 3.45 ratio black is ed,ef,el,au on low profile 16" tyres with 3,45 ratio, or can be used for 3.73 ratio |
||
| Top | |
||
| kick_ass_ford |
|
|||
|
Thanks for the help guys
_________________ EF XR6 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 20 guests |
