I required a internal wastegate valve.
I am looking for largest possible to fit.
If needed I will purchase a longer reach swing arm to be able to fit it.

I can get whatever machine work done to fit it, so all I need is the parts.

I know running a external will be a better option but at this stage all I can afford is
this option.

PM me prices if you can supply or people to contact that may be able to supply.

Also reply to thread what size valve you are using.

I would like to run at the least a 40mm valve if can be done.

I am in QLD southside of Brisbane and would prefer local but will concider all offers or sugestions from interstate.

Bump

this is a photo of the standard swing valve and the bigger valve i put in my BA, it was $55 from AVO turboworld in Melbourne.

 

 

Attachments:

Image(057).jpg [ 199.15 KiB | Viewed 737 times ]

Thanks on your reply.

Could you tell me what size the valve is

38mm, heres a link...

http://www.avoturbo.com/avoshop/product ... cts_id=988

Thanks.

Will purchase one from them if I cant get anything bigger

thats the biggest internal one you will get, as any bigger you would have to grind the wall out of the housing to make it fit, this is the perfect size and should stop any overboosting issues.

just out of interest what cooler/exhaust setup etc. are you putting on your XR6 Turbo?

I am fitting a Plazmaman Plenum , Air Box Pod setup & Pipe work.
HDI GT Series 600x300x75 Intercooler.
New engine running Argo rods, Ross Pistons etc
Bosch Pump Surge setup
Siemen Daka Injectors
I will be self tuning using SCT Racer Pro Software and Xcal 2

Currently fitted
X force 3.5" single with the 3.5" dump with seperate wastegate dump pipe.
Nizpro Valve springs
Nizpro modified injectors
Walbro Pump
T56
CI Twin Plate
Flash tuned by ?

Basically will be looking for a street tuned 400rwkw @ under 20psi to a track tune 450rwkw @ under
25psi.
That is when the new engine goes in.
If I dont get to the numbers I want I will then look at new Exhaust Manifold with external gate.