|
| vrblou02 |
|
|||
|
hey crew
im after a tensioner pulley for the ed as the 1 on it seized and hence snapped the belt and alternator belt alternator is done jus waiting to get new pulley before i can do the power steering belt:) if any1's got 1 would be great i just put 1 on off the wagon but it has stripped the main big bolt trying to do it back up as i only had a big shifter to do it as some lw life scums decided to steal everything i own from my black beast and my tx5 in campbelltown if any1 hears or no's anything please let me no also just a little note my car only started playing up and wouldnt run properly after this happened so any ideas? cheers Drifty
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| efLIAM |
|
||
|
hey bud not to sure if its the same one but i have a tensioner off a 6cyl ef im pretty sure i have 2 laying around in my garage there both in good working order
pm me if your interested |
||
| Top | |
||
| vrblou02 |
|
|||
|
yea mate im pretty sure there all mthe same
although i could be wrong can any1 verify this? if they are the same i may be interested in the both aslong as the bolts on them are not stripped an cornered off like my one is lol cheers Drifty
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| efLIAM |
|
||
|
lol umm im not sure if i have both sets of bolts but im positive i have one full set and there all good
|
||
| Top | |
||
| FLASH |
|
|||
|
Try NSW Bearing supplies, I just pressed out the old ones and put a new bearings in both. I think from memory there about $18. You just need to give them the number off the bearings themselves as they wont know which ones Suits a "ford". There heaps cheaper than getting a new pulley from ford (about $36 i think) or risking running a second hand pulley. If you don't have access to a press go to a engineering shop the'll more than likely do it for you for nothing as its a 5min job (swapping the bearing that is).
_________________ FALCAHOLIC |
|||
| Top | |
|||
| vrblou02 |
|
|||
|
yea cheers flash but its easier for me if some1 jus has the pulley and bracket there on as 1 of them the bearing is gone and the other the big bolt has stripped
so efliam if u have the pulley on the bracket an u got 2 of them that would be good i have got the bolts here as there only 3 bolts for them aslong as the nuts arent stripped on them an they spin freely ill be happy how much? say the postage fee:P let me no cheers Drifty
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| TROYMAN |
|
||
|
just to let you know.
the ef tensioner is completely different to ed.. the ef runs the single surpentine belt and the ed is like ea/eb it runs 3 belts..and the ed power steering is a v belt.. |
||
| Top | |
||
| vrblou02 |
|
|||
|
TROYMAN wrote: just to let you know.
the ef tensioner is completely different to ed.. the ef runs the single surpentine belt and the ed is like ea/eb it runs 3 belts..and the ed power steering is a v belt.. oh ok thanks troy i no they run a single belt but does that mean the pulley tensioners are different bolt up an style? can any1 verify anything here please cheers Drifty
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| TROYMAN |
|
||||
|
unfortunatly they are completely different..
here is a pic of the ef tensioner.. and you already know what a ed one looks like..
|
||||
| Top | |
||||
| vrblou02 |
|
|||
|
thanks heaps for ur help troy
aint seen u in a while lol so that means the ef tensioner pulleys wont fit then is that right? if thats the case sorry liam it looks like a no go then soz bud  :(
so if any1 else here has 1 or 2 off an ed then would be great cheers Drifty
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 7 guests |
