Fordmods Logo

AU falcon upgrade to kenwood CD, immobiliser problems 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: AU falcon upgrade to kenwood CD, immobiliser problems
Posted: Sun Jan 01, 2017 10:04 am 
Fordmods Newbie
Offline

Age: 53

Posts: 3

Joined: 31st Dec 2016

Ride: Ford Falcon au

Location: Brisbane
QLD, Australia

Hi guys,
A week ago I replaced the standard falcon CD player (as it would not read discs) with a aftermarket Kenwood head unit. Everything worked fine for around 5days then the immobiliser light started to flash on about the 10th trip. Now the entire smartlock wont operate and cannot reset the System. Is this a coincidence or Any ideas?
Top
 Profile  
 
 
 Post subject: Re: AU falcon upgrade to kenwood CD, immobiliser problems
Posted: Sun Jan 01, 2017 9:46 pm 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

GreenAU wrote:
Hi guys,
A week ago I replaced the standard falcon CD player (as it would not read discs) with a aftermarket Kenwood head unit. Everything worked fine for around 5days then the immobiliser light started to flash on about the 10th trip. Now the entire smartlock wont operate and cannot reset the System. Is this a coincidence or Any ideas?


does interior light work -check fuse if not
Top
 Profile  
 
 
 Post subject: Re: AU falcon upgrade to kenwood CD, immobiliser problems
Posted: Mon Jan 02, 2017 8:39 am 
Fordmods Newbie
Offline

Age: 53

Posts: 3

Joined: 31st Dec 2016

Ride: Ford Falcon au

Location: Brisbane
QLD, Australia

Hi Ted, yes the interior light still functions, the key I normally use won't start the car, immobiliser flashes but the spare does work. Still no remote locks to open the doors or boot.
Top
 Profile  
 
 
 Post subject: Re: AU falcon upgrade to kenwood CD, immobiliser problems
Posted: Mon Jan 02, 2017 10:02 pm 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

once you start to try and fix you may loose the ability to start
scan for codes
is this smartlock or smartshield -
smartshield started approx 6/99 and requires scan tool (ford)to program - key ring slot only goes approx half way across key

check All fuses with a test light
if smartlock try leaving ignition reds on for an hour -


try reprogramming remotes -close doors -key to accessory position and within 5 seconds push rear demist switch 3 times -doors should cycle then push remote button -


disconnect battery and reconnect
possible bem module -will require scantool if smart shield
Top
 Profile  
 
 
 Post subject: Re: AU falcon upgrade to kenwood CD, immobiliser problems
Posted: Sun Jan 08, 2017 9:09 pm 
Fordmods Newbie
Offline

Age: 53

Posts: 3

Joined: 31st Dec 2016

Ride: Ford Falcon au

Location: Brisbane
QLD, Australia

Checked all fuses and left ignition on for an hour. Smart lock still won't allow to reprogram remotes and original key still does not work. Spare key starts car only. Tried remotes next day and the doors function. Will have to stick with one key only. Thanks guys
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu May 02, 2024 7:44 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names