Hi guys
as the heading says sor some reason It wont work...I have even put another actuator into the door and it still dose not work..All the rest work well.
I have put the multi meter on the plug that you plug the actuator into...its a 3 pin plug...and only one pin seems to reads 12 volts. Not that I am that good with the multi meter

Its a 1995 6cly auto EF Falcon Gli with smartlock

dose someone know what might be happening ?

check the wiring from the plug back to the door pillar and in the rubber cover,look for a broken wire,all doors are wired together on the same wires ,except the fronts have 4 wires,backs have 3.the wire may be broken or have some damage,are the wires solid in the plugs,not pulled back.

Check wiring at plug in door pillar you have to pull plug out of pillar. Common breaking point.

Hi guys
thanks for the info....I will check that..thanks to you guys and this site I am learning a bit about this car..being so used to xw,xy's & xe's this is all very complicated for me
Thanks again
Luc