|
| GeZza200 |
|
||
|
im in if theres a group buy
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| TROYMAN |
|
||
|
ive had one machined out to 69mm but thats the max it could be taken to.. otherwise the butterfly intrudes into the isc air passage..
it made a slight difference after 4500rpm like has been mentioned.. but i had an issue with the tps being out of range as the butterfly shaft was now in a different position on closed throttle, compared to the std one.. but this can be overcome by elongating or making the screw holes in the tps larger to gain adjustment.. i never did a before and after dyno thou! |
||
| Top | |
||
| FAST-XR |
|
|||
|
I replicated the exact same shape of the std butterfly(elipse) but scaled it up, so the size of the butterfly is 68.0 x almost 69mm, its been CNC machined so its within 0.05 of a mm, it sits pretty much in the same position... and gave me no throttle speed problems
_________________ 07 BF MKII XR6T |
|||
| Top | |
|||
| green car |
|
||
|
On your first dyno run did it only get revved to 4900 or is that where it stopped making power?
Im just wondering if the motor was pulling the same max rpm on the dyno as the day it had the bored out t/b dyno run.
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| FAST-XR |
|
|||
|
4900 is where the curve peaked not where the run finished, when power decreases by 10% after peaking the dyno automatically ends the run. which is what happened. (approx 5400 rpm)
on the second run, the car actually hit rev cut which ended the run (5750 rpm)
_________________ 07 BF MKII XR6T |
|||
| Top | |
|||
| frankieh |
|
|||
|
ohhh... this sounds like a mod my supercharged EL motor would benefit from....
|
|||
| Top | |
|||
| FAST-XR |
|
|||
|
definately with the s/c!
_________________ 07 BF MKII XR6T |
|||
| Top | |
|||
| doofus |
|
|||
|
im in for a group buy for sure! Very good price indeed.
_________________
|
|||
| Top | |
|||
| green car |
|
||
|
FAST-XR wrote: 4900 is where the curve peaked not where the run finished, when power decreases by 10% after peaking the dyno automatically ends the run. which is what happened. (approx 5400 rpm)
on the second run, the car actually hit rev cut which ended the run (5750 rpm) Yeah cool, never knew thats how it worked but it makes sense now. Looks to be a worthwhile mod 
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| FAST-XR |
|
|||
|
ok ive sourced the brass sheet for the butterfly material, and will be machined sometime soon, price will be $180 (exchange)
what you will get: - a throttle body which has been bored out to 68mm - a thinned shaft (top half removed) - 2 new dome head screws to suit the new thickness - a brand new butterfly with a sharpened leading edge. ill have the first complete units ready for sale after christmas ill start a new for sale thread when the 1st one is ready... thanks vince
_________________ 07 BF MKII XR6T |
|||
| Top | |
|||
| FAST-XR |
|
|||||
|
and here is the drawing
_________________ 07 BF MKII XR6T |
|||||
| Top | |
|||||
| frankieh |
|
|||
|
Looks very professional...
nicely done. |
|||
| Top | |
|||
| GeZza200 |
|
||
|
Looking good, im in on the group bye when it happens. Also when we receive them will they be a complete unit or do we put them together?
Cheers
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| FAST-XR |
|
|||
|
thanks, i thought id improve on it instead of just boring it out only, the shaft mod and sharpened edge will only help... plus it makes them more Superior to the TB's that get sold on EBAY for much more $$$ !!!! i will also polish some of the casting marks from the inside of the opening
_________________ 07 BF MKII XR6T |
|||
| Top | |
|||
| craigosmoddedef |
|
||
|
bruce heinrich worked on my brothers ef and told me bro that a larger throttle bod was a waste of time. and coming from bruce... well u know. (those who dont know bruce he has been racing saloon cars for years and has been nearly unstoppable.
_________________ yee - ha |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 52 guests |
