Hey guys, what would cause the fan in a ba ghia to stop working? It's the main one in the cabin for the heater/aircon, we can still feel hot and cold except no air is being thrown out the vents (no noise from the fan either). I checked a fuse in the engine bay and it looked fine, can't really find much else.

Any help would be greatly appreciated!!
cheers

Do they have a fan speed resistor block, or are they done through the BEM. ?????
I'm not up on BA onwards.

check a/c fuse under bonnett-
check connection at HIM module in passenger footwell area -(2pin should have earth on black wire & earth on brown wire with ignition & fan on)
check connection to fan motor, previous brown wire is earth to fan - yellow wire should have power all the time - feeds off main fuse then a/c fuse -
try lightly tapping fan motor -
if no output from HIM module and other controls work on ICC susspect HIM module is faulty and will require dash removal to replace so get it scanned first ...

All fixed!! for future reference it was the cabin fan itself, the motor burnt out and is built into the fan as a unit. Grabbed a spare from a wreckers and she's all good again